- RS Stock No.:
- 103-8453
- Mfr. Part No.:
- 207109 & T0-2-8900/I1
- Manufacturer:
- Eaton
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 103-8453
- Mfr. Part No.:
- 207109 & T0-2-8900/I1
- Manufacturer:
- Eaton
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
Eaton Non-Fused Switch Disconnectors - T0 Series Rotary Switches
The T0 series of switch disconnectors from Eaton are compact and robust. Rotary Cam Switches can be used for many switching and control applications, for example as ON-OFF, main, main/control, or instrument switches. The device consists of a hand actuator, the switch unit and the mounting accessories. This range of isolator switches is also suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 20 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 20 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.
Specifications
Attribute | Value |
---|---|
Number of Poles | 3P+N |
Maximum Current | 20A |
IP Rating | IP65 |
Power Rating | 6.5kW |
Voltage Rating | 690V |
Electrical Phase | 1, 3 |
Handle Colour | Red |
Normal State Configuration | 3NO |
Series | T0-2 |
Switch Rating | 110A |
Length | 80mm |
Width | 102mm |
Depth | 120mm |
Maximum Operating Temperature | +50°C |
Throw Configuration | Single |
Minimum Operating Temperature | -25°C |
Terminal Type | Screw |