Phoenix Contact PT 2.5-DIO/R-L Series Grey Multi Level Terminal Block, 0.14 → 4mm², Single-Level, Push In

Using the diode terminal blocks of the PT push-in connection terminal blocks makes it possible to solve a variety of switching tasks. The diode is integrated either from left to right or vice versa in the terminal housings. Three and four-conductor terminal blocks are also available for multi-conductor connections.

Integrated diodes (1N 4007) and lamps on certain parts
Push-In technology with 50 % less insertion force for direct plugging from 0.34 mm²
Configurations include lamp test circuits and fault message circuits

Establish secure electrical connections in your equipment with this multi-level terminal block from Phoenix Contact. It's easy to mount on a standard DIN rail and has a pair of conductors that you can connect to your wiring or components. This makes it a versatile option that's compatible with common fixtures, so it's easy to integrate into your existing setup.
The block is designed for easy termination, with a push-in connection method that needs 50% less insertion force than alternative systems. This makes for quick, tool-free installation and maintenance. The durable grey PA (polyamide) housing has excellent impact strength combined with low weight, so you can expect reliable performance and reduced strain on your system. With a surge voltage rating of 8kV, this block will protect your equipment from over-voltage and short circuits, improving workplace safety.

• Cable cross-sectional area of 0.14 to 4mm²
• Grey in colour
• Current rating of 500mA
• Single level
• Voltage rating of 800V
• Wire size of 26 to 12AWG (American Wire Gauge)
• UL (Underwriter Laboratories) 94-V0 flammability rating indicates that the product will burn for no more than 15 seconds when exposed to a naked flame

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm² and up.