Wago, 282 Series Standard Din Rail Terminal, Clamp Termination

  • RS Stock No. 867-730
  • Mfr. Part No. 282-687
  • Manufacturer Wago
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Protective terminal block for 3 conductors

Protective terminal blocks for 3 conductors (1 input and 2 output) for mounting on DIN-type TS 35 rails. These terminals feature cage clamp technology for ultra-quick connection.
These terminals are front-wired, and four versions are available to receive wire sections 1.5 to 6 mm2.
These terminal blocks can receive end plates designed for standard terminal blocks.

870 Series

Compact screwless DIN rail mount terminals suitable for use with TS35 ’Top Hat’ rails. The compact size of the terminal is possible due to the new cage clamp designed to satisfy the need to reduce cabinet space on site.

Accept cables 0,08 - 2,5 mm²/4 mm² flexible wire
Front cabling enables further space saving
Rated at: 500V/6kV/24A
Jumper bar rated current: 18A
Suitable marker cards and labels also available (each pack contains 5 cards, with 100 markers per card)

Specifications
Attribute Value
Series 282
Wire Size 24 → 10 AWG
Cable CSA 6mm²
Colour Green/Yellow
Number of Levels Triple
Termination Method Clamp
15 Within 3 working day(s) (Global stock)
105 Within 4 working day(s) (Global stock)
Price Each (In a Pack of 5)
SGD 7.944
(exc. GST)
SGD 8.50
(inc. GST)
units
Per unit
Per Pack*
5 - 20
SGD7.944
SGD39.72
25 - 45
SGD7.786
SGD38.93
50 +
SGD7.704
SGD38.52
*price indicative
Related Products
It is easy to wiring because of the ...
Description:
It is easy to wiring because of the different colour with each key point. You can use + driver when removing nameplate from cover. When nameplate is opened at 140°with simple-lock system. It is easy to find the wiring point ...
Terminal block associated with connector on board to ...
Description:
Terminal block associated with connector on board to prevent wrong wiring. Terminal number and connector number are one to one connections. Its possible to design any circuit combination. Efficiency of your work improved by use of new connection type. If ...
It is downsizing PLC and SBC interface. This ...
Description:
It is downsizing PLC and SBC interface. This compact size brought to downsizing control board. Connector terminal and terminal blocks are one to one connections. We use support screw that is easy to wiring. The product features the prevention of ...
The support screw is held on the conductive ...
Description:
The support screw is held on the conductive plate even after it is loosened. Therefore you just have to tighten up the screw when connecting Y-type solderless terminal. This type consisting of a smaller number of parts comes at a ...