Netgear 8 Port Network Switch

The ProSafe FS108P provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The eight Fast Ethernet ports can be used for any 10/100 Mbps link and four of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to 802.3af end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the ProSafe FS108P automatically determines PoE requirements, speed, duplex, and cable type using AutoUplink

Data switching & Power-over-Ethernet (PoE) in one unit
8 data switching ports, 4 of which provide PoE
Reduces cables and eliminates need for dedicated electrical outlets
Locate wireless devices high on walls or ceilings for max coverage
AutoUplink™ auto detects speed, duplex & cable type
Automatically detects PoE devices and supplies power as needed
Compact & Flexible design
Plug and play

The Netgear ProSAFE power over Ethernet switch has 8, RJ45 ports. It has an electrical rating of 48V and 1.25A. This provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The 8 Fast Ethernet ports can be used for any 10/100 Mbps link and four of these ports can supply industry-standard IEEE 802.3af power. Also, it discontinues the power when PoE devices are disconnected. It is ideal for small business networks that need to inexpensively use PoE to deploy wireless access points and IP-based network surveillance cameras.

Bandwidth is 1.6Gbps
Buffer memory is 96KB embedded memory per unit
927,000 hours MTBF
Europe general plug type
Status LEDs of Power, PoE maximum Power, Link, activity, speed, PoE active, PoE fault
Allows connection of any PoE 802.3af certified peripherals regardless of their power supply: IP cameras, IP telephones
Auto-uplink (port automatic crossover)
Auto-detection of speed, 10/100Mbps and half or full duplex mode
Network ports with in-built status indicators
Operating temperature ranges between 0°C and 40°C

CE certified
FCC Part 15 Class B certified
VCCI Class B certified
EN 55022 (CISPR 22), Class B
C-Tick, Class B certified
EN 55024
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.1p priority tags
IEEE 802.3x Flow Control
IEEE 802.3af DTE Power via MDI

Netgear Managed Switches

Netgear's Layer 2 Managed Switches offer superior value with a lower cost per port than other leading competitors. Everything necessary for easy set-up comes in the box, including; uplinks, stacking ports, stacking cables and a rack mounting kit. Administration from remote locations is straightforward with Netgear's web interface. Every Fast Ethernet Managed Switch offers high performance via two Gigabit ports for connectivity to servers and the network backbone.