ROHM BD65491FV-E2, Brushed Motor Driver IC 16-Pin, SSOP

  • RS Stock No. 171-4073
  • Mfr. Part No. BD65491FV-E2
  • Manufacturer ROHM
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The BD65491FV motor driver provides 1 Full-ON Drive H-bridge channel, while BD65492MUV provides 2 Full-ON Drive H-bridge channels. These ICs feature wide range operating from 1.8V and low power consumption by high switching speed in a compact surface mount package.

Low ON-Resistance Power DMOS output: Full-ON Drive block with 0.35Ω Typ.
Range of motor power supply voltage: 1.8V to 16.0V
Charge pump-less type with p-channel DMOS for the upper side transistor
The highest performance in regard to switching speed, and 4-values selection
Turn On Time: 150ns & Turn Off Time: 50ns
Drive mode switch function
Maximum output current for H-bridge: DC maximum 1.2A, Peak maximum 4.0A
Control input pins corresponding to the signal of 1.8V system
Built-in UVLO (Under Voltage Lockout Protection) function & TSD (Thermal Shut Down) circuit
Standby current: 0μA Typ.
Applications:
Coin Processing Machines
Digital Still Camera
Machine Vision Camera for Industrial

Specifications
Attribute Value
Motor Type Brushed DC
Configuration Half Bridge
Output Configuration Half Bridge
Maximum Output Current 4A
Maximum Supply Voltage 5.5 (Power) V, 16 (Motor) V
Mounting Type Surface Mount
Package Type SSOP
Maximum Operating Supply Voltage 5.5 (Power) V, 16 (Motor) V
Pin Count 16
Minimum Operating Supply Voltage 1.8 (Motor) V, 2.5 (Power) V
Typical Switching Frequency 500 (Maximum)kHz
Width 4.4mm
Product Height 1.15mm
Minimum Operating Temperature -30 °C
Product Width 4.4mm
Dimensions 5 x 4.4 x 1.15mm
Length 5mm
Maximum Operating Temperature +85 °C
Product Length 5mm
Height 1.15mm
Temporarily out of stock - back order for despatch 08/07/2020, delivery within 3 working days from despatch date
Price Each (On a Reel of 2500)
SGD 3.72
(exc. GST)
SGD 3.98
(inc. GST)
units
Per unit
Per Reel*
2500 +
SGD3.72
SGD9,300.00
*price indicative
Related Products
BD63710AEFV is a bipolar low-consumption driver that driven ...
Description:
BD63710AEFV is a bipolar low-consumption driver that driven by PWM current. Rated power supply voltage of the device is 36 V, and rated output current is 1.0 A. CLK-IN driving mode is adopted for input interface, and excitation mode is ...
The device is a full bridge motor driver ...
Description:
The device is a full bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side driver and two low-side switches. Both switches are designed using STMicroelectronics’ well known and proven proprietary VIPower® ...
The reversible motor driver for output 1.0A for ...
Description:
The reversible motor driver for output 1.0A for 1 motor can set the output modes to four modes, normal, reverse, stop(idling), and braking in accordance with logic input (2 inputs). Built-in surge absorption diodeBy built-in power save circuit, current consumption ...
The range of power drivers by STMicroelectronics are ...
Description:
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. ...