ON Semiconductor BLDC-GEVK Internet of Things (IOT) BLDC Motor Driver Shield Evaluation Kit BLDC Evaluation Kit

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

ON Semiconductor Evaluation Board

The ON Semiconductor evaluation board is an internet of things motor driver shield evaluation board. It comes with LV8907, high performance, sensor-less three-phase BLDC motor controller with integrated gate drivers for driving external N-MOSFETs. An on-chip two-stage charge pump provides the required gate current for a wide range of ultra-low RDS(ON) type external N-MOSFETs. This is applicable for three-phase BLDC motor driver.

Features and Benefits:

• A watchdog timer
• An in-built linear regulator for powering an external circuit
• An SPI interface is provided for parameter setting and monitoring the system health and utilized through the PCA9655E's 16 bits of general purpose parallel input and output (GPIO) expansion
• Local interconnect network (LIN) transceiver
• Supports open-loop, as well as, closed-loop speed control with user configurable start up, speed setting and proportional/integral (PI) control coefficients
• System protection and diagnostic functions such as over-current, over-voltage, short-circuit, under-voltage and over-temperature

Specifications
Attribute Value
Kit Name Internet of Things (IOT) BLDC Motor Driver Shield Evaluation Kit
Kit Classification Evaluation Kit
For Use With Three-Phase BLDC Motor Driver
Motor Type BLDC
Featured Device LV8907UWR2G, MBRB40250TG, MM3Z39VT1G, MMDL6050T1G, NTMFS5C404NLTT3G, PCA9655EMTTXG
1 In stock for delivery within 3 working days
Price Each
SGD 87.60
(exc. GST)
SGD 93.73
(inc. GST)
units
Per unit
1 +
SGD87.60
Related Products
Silicone Lab’s Si1147 Module Evaluation Kit and come ...
Description:
Silicone Lab’s Si1147 Module Evaluation Kit and come with a Si114x Programmer’s Tool kit software. This enables the development kit straightforward access to the functions and features of the Si1145-M01, Si1146-M01 and Si1147-M01 optical sensors, while supporting the evaluation of ...
Supports CAN 2.0b and ISO11898-2Intuitive PC User Interface ...
Description:
Supports CAN 2.0b and ISO11898-2Intuitive PC User Interface for functions such as configuration, trace, transmit, filter, log, etc.Enhanced features in the PC GUI for Microchip’s PIC microcontroller support such as ECAN register view in the GUIDirect access to CAN H ...
The HFBR-0528Z kit from Avago Technologies, facilitates the ...
Description:
The HFBR-0528Z kit from Avago Technologies, facilitates the evaluation of DC to 10MBd high performance 650nm transmitter HFBR-1528Z and receiver HFBR-2528Z (stock no. 236-846). Fitted with SMA connectors, the HFBR-0528Z evaluation board makes it easy to connect a waveform/pattern generator ...
Avago Technologies AFBR-0550Z Evaluation Kit lets you evaluate ...
Description:
Avago Technologies AFBR-0550Z Evaluation Kit lets you evaluate the fibre optic HFBR-1414PTZ transmitter and the AFBR-2419TZ receiver. The transmitter HFBR-1414PTZ fitted is used as the reference Tx. The board also consists of AFBR-2419TZ fibre optic receiver, SMA connectors and pin ...