Maxim DS8500-JND+, Modem HART Protocol Modem FSK, 3.6 V, 1200bit/s, 20-Pin, TQFN

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

HART Modems, Maxim Integrated Products

Note

Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase.

HART Modem Communications

A range of devices which conform to the HART (Highway Addressable Remote Transducer) industrial communications protocol. HART communications frequently utilize 4-20mA networks and are widely used in Automation and Control applications. The HART standard provides for both point-to-point (analogue or digital) and multi-drop (digital only) modes of operation, the latter using a fixed loop current of 4mA.

Specifications
Attribute Value
Modem Type HART Protocol Modem
Modulation Technique FSK
Transmission Media Type Wire
Power Supply Type Single
Typical Operating Supply Voltage 3.6 V
Maximum Data Rate 1200bit/s
Typical Supply Current 0.285mA
Mounting Type Surface Mount
Package Type TQFN
Pin Count 20
Dimensions 5 x 5 x 0.73mm
Height 0.73mm
Length 5mm
Maximum Operating Temperature +85 °C
Width 5mm
Minimum Operating Temperature -40 °C
192 In stock for delivery within 4 working days
Price Each
SGD 13.01
(exc. GST)
SGD 13.92
(inc. GST)
units
Per unit
1 - 9
SGD13.01
10 - 49
SGD12.30
50 - 99
SGD11.38
100 - 249
SGD10.60
250 +
SGD9.91
Packaging Options:
Related Products
The Microchip MTCH652 is a Driver IC designed ...
Description:
The Microchip MTCH652 is a Driver IC designed to drive High-Voltage Outputs in Capacitive Touch applications. The MTCH652 combines a Boost Converter with 19 Level Shifters to drive up to 19 channels.The device is programmable via a Configuration (CONFIG) registers. ...
The Maxim family of dual RS232 line drivers ...
Description:
The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface. Maxim’s RS232 dual transmitter/receiver will allow applications such as interface translation, modem, laptop as well as RS232 battery-powered systems due ...
Low Voltage Differential Signaling, or LVDS, is an ...
Description:
Low Voltage Differential Signaling, or LVDS, is an electrical signaling system that can run at very high speeds over cheap, twisted-pair copper cables. Applications: Firewire, SATA, SCSI.
Low Voltage Differential Signaling, or LVDS, is an ...
Description:
Low Voltage Differential Signaling, or LVDS, is an electrical signaling system that can run at very high speeds over cheap, twisted-pair copper cables. Applications: Firewire, SATA, SCSI.