Microchip PIC18F8722-I/PT, 8bit PIC Microcontroller, PIC18F, 40MHz, 1.024 kB, 128 kB Flash, 80-Pin TQFP

  • RS Stock No. 887-7114
  • Mfr. Part No. PIC18F8722-I/PT
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

PIC18F8527/8622/8627/8722 8-Bit Microcontrollers

The PIC18F Microcontrollers from Microchip are the most capable 8-bit devices within Microchip’s offer. Available within the range is CAN, LIN and Ethernet capability as part of a comprehensive range of peripherals to meet the needs of embedded applications and versions featuring XLP (Extreme Low-Power) Technology for where power consumption is a key consideration.

The Microchip PIC18F8527/8622/8627/8722 family of Microcontrollers are 8-bit devices based upon Microchip’s PIC18 architecture and includes XLP (eXtreme Low Power) technology.

Microcontroller Features

C Compiler Optimized Architecture
Self-Programmable under Software Control
Priority Levels for Interrupts
8 x 8 Single-Cycle Hardware Multiplier
In-Circuit Serial Programming™ (ICSP™) via Two Pins
In-Circuit Debug (ICD) via Two Pins
Wide Operating Voltage Range: 2.0V to 5.5V
Programmable Brown-out Reset (BOR) with Software Enable Option
Extended Watchdog Timer (WDT)
Flexible Oscillator Structure

Power Management Features

Run: CPU On, Peripherals On
Idle: CPU Off, Peripherals On
Sleep: CPU Off, Peripherals Off
Ultra Low 50 nA Input Leakage
Run mode Currents Down to 25 μA Typical
Idle mode Currents Down to 6.8 μA Typical
Sleep mode Current Down to 120 nA Typical
Timer1 Oscillator: 900 nA, 32 kHz, 2V
Watchdog Timer: 1.6 μA, 2V Typical
Two-Speed Oscillator Start-up

Peripheral Features

High-Current Sink/Source 25 mA/25 mA
Three Programmable External Interrupts
Four Input Change Interrupts
Three Enhanced Capture/Compare/PWM (ECCP) modules
Two Capture/Compare/PWM (CCP) modules
Master Synchronous Serial Port (MSSP) module - supports 3-Wire SPI (all 4 modes) and I2C™
Enhanced Addressable USART module block (no external crystal required)
10-Bit Analogue-to-Digital Converter – 12 or 16 channels depending on model
Dual Analogue Comparators with Input Multiplexing
Programmable 16-Level High/Low-Voltage Detection (HLVD) module

Specifications
Attribute Value
Family Name PIC18F
Package Type TQFP
Mounting Type Surface Mount
Pin Count 80
Device Core PIC
Data Bus Width 8bit
Program Memory Size 1.024 kB, 128 kB
Maximum Frequency 40MHz
RAM Size 3.936 kB
Number of PWM Units 5
ADC Channels 16
Number of SPI Channels 2
Typical Operating Supply Voltage 4.2 → 5.5 V
Number of I2C Channels 2
Number of Timers 5
Number of USART Channels 2
Timers 2 x 8 bit, 3 x 16 bit
Dimensions 12 x 12 x 1.05mm
Pulse Width Modulation 2 (CCP), 3 (ECCP)
Program Memory Type Flash
ADC Resolution 10bit
Width 12mm
Height 1.05mm
Timer Resolution 8 bit, 16bit
ADCs 16 x 10 bit
Length 12mm
Maximum Operating Temperature +85 °C
Number of ADC Units 1
Minimum Operating Temperature -40 °C
Instruction Set Architecture RISC
595 In stock for delivery within 4 working days
Price Each (In a Tray of 119)
SGD 16.492
(exc. GST)
SGD 17.646
(inc. GST)
units
Per unit
Per Tray*
119 +
SGD16.492
SGD1,962.548
*price indicative