The ATmega4808 is a microcontroller featuring the 8-bit AVR® processor with hardware multiplier - running at up to 20MHz and with up to 48Kb Flash, 6Kb SRAM and 256 b of EEPROM in 28- and 32-pin packages. The series uses the latest Core Independent Peripherals with low power features. Including Event System, intelligent analog and advanced peripherals.
8-bit high-performance AVR RISC CPU
Hardware multiplier
Three sleep modes:
Idle
Standby
Power Down
Event System
Watchdog Timer (WDT)
Power-On Reset (POR)
Brown-Out Detection (BOD)
Single pin programming and debugging interface (UPDI)
Analog Features
12 Channel 10-bit ADC with Voltage Reference
Analog Comparator (AC)
Timing/Waveform/Measurement Control
Configurable Custom Logic (CCL)
4x 16-bit Timer (TCA / TCB)
Cyclical Redundancy Check (CRC/SCAN)
Communication
SPI / I2C / USART
Attribute | Value |
---|---|
Family Name | Atmega |
Package Type | QFN |
Mounting Type | Surface Mount |
Pin Count | 32 |
Data Bus Width | 8bit |
Program Memory Size | 48 kB |
Maximum Frequency | 20MHz |
RAM Size | 6.144 kB |
Number of PWM Units | 1 |
ADC Channels | 12 |
Number of SPI Channels | 1 |
Typical Operating Supply Voltage | 1.8 → 5.5 V |
Width | 5mm |
Minimum Operating Temperature | -40 °C |
Program Memory Type | Flash |
Timer Resolution | 16bit |
Height | 0.9mm |
Timers | 1 (4 x 16 bit) |
ADCs | 1 (12 x 10 bit) |
Maximum Operating Temperature | +125 °C |
ADC Resolution | 10bit |
Number of UART Channels | 3 |
Number of USART Channels | 1 |
Dimensions | 5 x 5 x 0.9mm |
Number of Timers | 4 |
Number of ADC Units | 1 |
Length | 5mm |
Number of I2C Channels | 1 |
PWM Channels | 9 |