Mechanical Counter Baumer H 300.010A01A

  • RS Stock No. 150-489
  • Mfr. Part No. H 300.010A01A
  • Manufacturer Baumer
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

300 series Mechanical totalising counters

Models with stroke lever control.
One stroke equals one number count.
Pivoting control lever and automatic return.
Ø 4 mm control shaft.
Min. 38° and max. 60° stroke angle.
Maximum of 500 strokes/minute.

//media.rs-online.com/t_line/LF298944-10.gif
Specifications
Attribute Value
Shaft Speed Maximum 500rpm
Drive Shaft Diameter 4mm
4 Within 3 working day(s) (Global stock)
33 Within 4 working day(s) (Global stock)
Price Each
SGD 102.97
(exc. GST)
SGD 110.18
(inc. GST)
units
Per unit
1 - 4
SGD102.97
5 - 9
SGD100.39
10 +
SGD97.75
Related Products
Panel mounting counters with displays designed for use ...
Description:
Panel mounting counters with displays designed for use in harsh environmentsRemote reset facilityPanel cut out: Rectangular - 45.2mm x 22.4mm, Hexagonal - 36.8mm x 24.1mm, Round - 52mm dia.
All units are non-resettable and are continuously rated,Counters ...
Description:
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the ...
Totalising counter actuated by presence of a magnetic ...
Description:
Totalising counter actuated by presence of a magnetic fieldNo power supply requiredPolycarbonate housingCentre pole magnet with countersunk central fixing hole available separatelyMagnet stock no. 260-369, 20mm diameter, 10 mm heightSupplied with 3 types of mounting bracketsProvision for fitting a cable ...
For counting, plotting, checking, numbering people, cars, items, ...
Description:
For counting, plotting, checking, numbering people, cars, items, etc. in productionReset by knurled knob.Supplied with a ring for manual use.Supplied with clip-on base on the enclosure, for fitting the counter to a horizontal or vertical support bracket.