ROHM BD50HC0MEFJ-CE2, 1 Low Dropout Voltage, Voltage Regulator 1A, 5 V 8-Pin, HTSOP
- RS Stock No.:
- 184-7688
- Mfr. Part No.:
- BD50HC0MEFJ-CE2
- Manufacturer:
- ROHM
Discontinued product
- RS Stock No.:
- 184-7688
- Mfr. Part No.:
- BD50HC0MEFJ-CE2
- Manufacturer:
- ROHM
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- DE
Product Details
BD50HC0MEFJ-C is a LDO regulator with output current 1.0 A. The output accuracy is ±3% between Ta = -40 °C to +125 °C. It has package type: HTSOP-J8 which is small and good heat resistance. Over current protection (for protecting the IC from destruction by output short circuit), circuit current ON/OFF switch (for setting the circuit 0 μA at shutdown mode), and thermal shutdown circuit (for protecting IC from heat destruction by over load condition) are all built in. It is usable for ceramic capacitor and enables to improve smaller set and long-life.
High Accuracy Reference Voltage Circuit
Built-in Over Current Protection Circuit (OCP)
Built-in Thermal Shutdown Circuit (TSD)
With Shutdown Switch
Built-in Over Current Protection Circuit (OCP)
Built-in Thermal Shutdown Circuit (TSD)
With Shutdown Switch
Specifications
Attribute | Value |
|---|---|
| Regulator Type | Low Dropout Voltage |
| Maximum Output Current | 1A |
| Output Voltage | 5 V |
| Number of Outputs | 1 |
| Line Regulation | 50 mV |
| Load Regulation | 75 mV |
| Accuracy | ±3% |
| Mounting Type | Surface Mount |
| Package Type | HTSOP |
| Pin Count | 8 |
| Output Type | Fixed |
| Dimensions | 4.9 x 3.9 x 0.85mm |
| Minimum Input Voltage | 4.5 V |
| Minimum Operating Temperature | -40 °C |
| Height | 0.85mm |
| Maximum Input Voltage | 8 V |
| Maximum Operating Temperature | 125 °C |
| Width | 3.9mm |
| Automotive Standard | AEC-Q100 |
| Length | 4.9mm |