ON Semiconductor NCV4274AST33T3G Linear Voltage Regulator, 400mA, 3.3 V, 2% 3+Tab-Pin, SOT-223

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CZ
Product Details

Low Dropout (LDO) Linear Voltage Regulators, 400mA, ON Semiconductor

This remarkable ON Semiconductor linear voltage regulator comes under the LDO (Low dropout) family. These products are monolithic integrated circuits designed as fixed-voltage regulators for a wide range of applications including local, on-card regulation. LDO voltage regulators may offer fast transient response, wide input voltage range, low quiescent current and low noise with high PSRR.

Features and Benefits
• Internal thermal overload protection
• Internal short circuit current limiting
• Output transistor safe – area compensation
• These are Pb-Free devices
• Output current in access of 400mA
• Output Voltage 3.3V
• Package type: SOT-223
• Accuracy +2%

Applications
Linear regulators are simple voltage regulator circuits commonly adopted in electronics. A Linear voltage regulator uses a closed feedback loop to bias a pass element to maintain a steady voltage across output terminals. Linear regulators are most commonly highly integrated, which include the pass element and feedback loop.

LDO (Low Dropout) Linear Voltage Regulators, ON Semiconductor

The Low dropout or LDO is a linear voltage regulator. We have a wide range of linear regulators. The LDO regulator can operate with a small input–output differential voltage. LDO voltage regulators may offer fast transient response, wide input voltage range, low quiescent current and low noise with high PSRR.

Specifications
Attribute Value
Output Voltage 3.3 V
Maximum Output Current 400mA
Package Type SOT-223
Output Type Fixed
Mounting Type Surface Mount
Minimum Input Voltage 4.5 V
Maximum Input Voltage 40 V
Pin Count 3+Tab
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Number of Outputs 1
Polarity Positive
Line Regulation 25 mV
Quiescent Current 0.15mA
Dimensions 6.7 x 3.7 x 1.65mm
Width 3.7mm
Height 1.65mm
Accuracy 2%
Dropout Voltage Measurement Current 250 mA
Load Regulation 30 mV
Length 6.7mm
Typical Dropout Voltage @ Current 1.27 V @ 250 mA
Series NCV4
16000 In stock for delivery within 4 working days
Price Each (On a Reel of 4000)
SGD 0.842
(exc. GST)
SGD 0.901
(inc. GST)
units
Per unit
Per Reel*
4000 +
SGD0.842
SGD3,368.00
*price indicative
Related Products
The ROHM TO220CP-3 package is a 3-terminal regulator ...
Description:
The ROHM TO220CP-3 package is a 3-terminal regulator available with several fixed output voltages. It has an output voltage rating of 5V and a current rating of 0.5A. This acts as a variable resistor, continuously adjusting to maintain a constant ...
The MIC94310 Ripple Blocker™ is a monolithic integrated ...
Description:
The MIC94310 Ripple Blocker™ is a monolithic integrated circuit that provides low-frequency ripple attenuation (switching noise rejection) to a regulated output voltage. This is important for applications where a DC/DC switching converter is required to lower or raise a battery ...
The L78L series of three-terminal positive regulators embed ...
Description:
The L78L series of three-terminal positive regulators embed internal current limiting, and thermal shut-down. Providing an adequate heat sink, up to 100mA output current can be delivered.
A range of Texas Instruments Low Dropout (LDO) ...
Description:
A range of Texas Instruments Low Dropout (LDO) Linear Voltage regulators. LDO voltage regulators are able to operate with a small input-output differential making them suitable for a variety of applications where conventional regulators would be unsatisfactory. The latest generation ...