Microchip MCP1630DM-LED2, Boost Mode LED Driver Demonstration Board for MCP1630V

  • RS Stock No. 401-983
  • Mfr. Part No. MCP1630DM-LED2
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

MCP1630 Boost Mode LED Driver Demo Board

The MCP1630 Boost Mode LED Driver Demo Board is a step-up, switch-mode, dc-dc converter used for power LED applications. The demo board provides a 350mA or 700mA constant current source with jumper selection. The operating supply is 9Vdc to 16Vdc and the board can supply 30W to a string of power LEDs.

Compact size with high output power
High efficiency over entire operating input voltage range
Selectable 350mA or 700mA output current
Up to 30W output power
Optional software dimming control
500 kHz switching frequency can be changed in firmware
Additional application functions can be provided in firmware

Supplied with

5 PCB mounted LEDs, User’s Guide (DS51665), Analog and Interface Products Demonstration Boards CD-ROM (DS21912)

LED Drivers, Microchip

Specifications
Attribute Value
LED Technology LED Driver
Kit Classification Demonstration Board
Featured Device MCP1630V
Kit Name Boost Mode
1 In stock for delivery within 4 working days
Price Each
SGD 62.40
(exc. GST)
SGD 66.77
(inc. GST)
units
Per unit
1 - 9
SGD62.40
10 - 99
SGD59.28
100 +
SGD56.32
Related Products
The EVALLED-ICL8002G-B2 is an evaluation board for dimmable ...
Description:
The EVALLED-ICL8002G-B2 is an evaluation board for dimmable 12 W LED bulb in non-isolated buck topology. The demo board high compatibility with a wide range of dimmers has been accomplished by adding damping and bleeding circuit blocks. The output current ...
This is a single stage power factor corrected ...
Description:
This is a single stage power factor corrected TRIAC dimmable isolated flyback LED driver intended for lighting applications such as down lights, PAR lamps and residential/commercial LED fixtures. The NCL30000 is based on a fixed on-time, critical conduction mode (CrM) ...
The NCV7680 is an octal LED driver designed ...
Description:
The NCV7680 is an octal LED driver designed for automotive LED rear combination lamps. External programmability of the NCV7680 allows the user to set the tail current and stop currents using a single resistor for each function. An optional external ...
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC ...
Description:
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC (BLDC) motor driver expansion board based on the STSPIN230 triple half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in ...