BU97510CKV-ME2, LCD Driver 216-Segments, 2.7 → 6 V, 64-Pin VQFP

  • RS Stock No. 171-4093
  • Mfr. Part No. BU97510CKV-ME2
  • Manufacturer ROHM
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

BU97510CKV-M is a 1/4 or 1/3 duty general-purpose LCD driver that can be used for automotive applications and can drive up to 216 LCD Segments. This product can support VA LCD displays, which has better optical performance with higher LCD voltage driving and higher frame frequency driving. It can also control up to 6 general-purpose outputs / PWM output ports for LED backlighting and LED button illumination realizing less flicker by various frequency setting function. TTL compatible input interface is also available, these are well-suited for wide-voltage range of MCUs.

1/4 or 1/3 duty setting selectable
1/4duty driving: Max 216 segments
1/3duty driving: Max 162 segments
1/3 or 1/2 bias setting selectable
Support wide range of operation voltage from 2.7V to 6.0V,
which can support TN LCD and VA LCD display.
Integrated LCD voltage driving circuit
Integrated oscillation circuit for LCD frame frequency
Line or Frame inversion driving selectable
Integrated 6ch general purpose outputs/ PWM outputs (SEG selectable)
Support 64 step PWM function to realize backlight/ button LED illumination
Support LCD frame frequency from 49Hz to 195Hz, total 8setting
Support PWM frequency from 146Hz to 2.34KHz,
total 16setting
Support 3 wire serial interface
Support TTL level input to connect 3.3V MCU directly
Support INHb terminal to control Display ON/OFF
Integrated voltage detected type power on reset circuit
No external components required
Low power consumption design
Car Navigation

Attribute Value
Number of Segments 216
Maximum Clock Frequency 600kHz
Maximum Supply Current 5 μA
Mounting Type Surface Mount
Package Type VQFP
Pin Count 64
Typical Operating Supply Voltage 2.7 → 6 V
Dimensions 10 x 10 x 1.4mm
Height 1.4mm
Width 10mm
Length 10mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Automotive Standard AEC-Q100
Temporarily out of stock - back order for despatch 27/02/2020, delivery within 3 working days from despatch date
Price Each (On a Reel of 1000)
SGD 1.603
(exc. GST)
SGD 1.715
(inc. GST)
Per unit
Per Reel*
1000 +
*price indicative
Related Products
BD37033FV-M is sound processors for car audio. The ...
BD37033FV-M is sound processors for car audio. The functions are stereo input selector with single end 3 and ground isolation input 2, volume, 3-band parametric equalizer, loudness, 6ch fader volume, LPF for subwoofer, anti-aliasing-filter, Mixing volume. Moreover, “Advanced switch circuit”, ...
ROHM's 2ch / 6ch electronic volume ICs feature ...
ROHM's 2ch / 6ch electronic volume ICs feature a wide dynamic range (131dB / 133dB). In addition, two ICs can be paired up via serial bus control for 8ch operation. Residual noise : 1.2μVrms {dynamic range : 131dB (IHF-A)}2ch independent ...
This series supports common control software, increasing design ...
This series supports common control software, increasing design and development efficiency. Tone quality can be adjusted by parametric equalizer using no external components. The built-in three-band equalizer sub woofer output allows for a space saving design. Reduce switching noise of ...
The Silicon Labs C8051F31x family of small form ...
The Silicon Labs C8051F31x family of small form factor mixed-signal microcontrollers (MCU) with an 8-bit CPU capable of up to 25 MIPS.Enable, disable and configure all the analogue and digital peripherals using the firmware. Flash memory can be reprogrammed even ...