FTDI Chip, 3.3 V USB to UART Cable, C232HD-DDHSP-0

  • RS Stock No. 751-1172
  • Mfr. Part No. C232HD-DDHSP-0
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

USB 2.0 Hi-Speed to MPSSE Cable, FTDI Chip

The USB 2.0 Hi-Speed to MPSSE cables contain a small internal electronic circuit board, utilising the FTDI FT232H, encapsulated into the USB connector end of the cable. This chip handles all the USB signalling and protocols. The cables provide a fast, simple way to connect devices with 3.3 or 5V digital interfaces to USB.

Based on the single chip USB Hi-Speed FT232H device
USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible
Entire USB protocol handled on the chip – No USB-specific firmware programming required
USB Type A connector for direct connection to a host or hub
USB bus powered
Fully assisted hardware or X-On / X-Off software handshaking
Synchronous Serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI and I²C
1kByte receive and transmit buffers for high data throughput
Transmit and receive LED drive signals
Adjustable receive buffer timeout
Support for USB suspend and resume
Low operating and USB suspend current Low USB bandwidth consumption
UHCI / OHCI / EHCI host controller compatible
Operating temperature range: -40 to +85°C
Cable length: 1800mm
FTDI’s royalty-free D2XX drivers eliminate the requirement for USB driver development in most cases

Specifications
Attribute Value
Interface Function USB to UART
Kit Classification Cable
Kit Name 3.3 V
Temporarily out of stock - back order for despatch 23/10/2019, delivery within 3 working days from despatch date
Price Each
SGD 38.12
(exc. GST)
SGD 40.79
(inc. GST)
units
Per unit
1 - 9
SGD38.12
10 - 49
SGD38.10
50 +
SGD36.21
Related Products
The VMUSIC2 module is a product which not ...
Description:
The VMUSIC2 module is a product which not only lets you add USB Flash disk interfacing to your product, but also allows you to play back MP3 and other popular digital music formats directly from a USB flash disk. Only ...
USB to USB Null Modem Cable designed to ...
Description:
USB to USB Null Modem Cable designed to be a modern replacement for the traditional serial null modem cable, allowing a user to connect two PCs using their USB ports. The user can then perform file transfers between the PCs ...
The VNC2 is the second of FTDI’s Vinculum ...
Description:
The VNC2 is the second of FTDI’s Vinculum family of Embedded dual USB host controller devices. The VNC2 device provides USB Host interfacing capability for a variety of different USB device classes including support for BOMS (bulk only mass storage), ...
The Vinculo is a dual channel USB Host/Device ...
Description:
The Vinculo is a dual channel USB Host/Device Controller is targeted at rapid development and prototyping of USB Host/Device interfaces. An optional Vinculo prototyping board provides add-on expansion board support. The Vinculo features an 8-channel, 10Bit ADC, PWM interface and ...