FTDI Chip, Null Modem Cable USB, USB NMC-2.5M

  • RS Stock No. 537-420
  • Mfr. Part No. USB NMC-2.5M
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

USB to USB Null Modem Cable

USB to USB Null Modem Cable designed to be a modern replacement for the traditional serial null modem cable, allowing a user to connect two PCs using their USB ports. The user can then perform file transfers between the PCs via the USB interface.

USB powered and USB 2.0 full speed compatible, allowing data transfer rates of up to 3 Mbaud at TTL levels.
FTDIChip-ID supported, with each cable end programmed with a unique USB serial number allowing the user to create security or password protected file transfer between PCs.
FCC and CE compliant

Note

Requires USB drivers available free from http://www.ftdichip.com

FTDI Chip Null Modem Cable

The FTDI chip null modem cable is a modern replacement for the traditional serial null-modem cable. It allows a user to connect two PCs using their USB ports. The user can then perform file transfers between the PCs via the USB interface. This cable contains a small internal electronic circuit board, encapsulated into the USB connector at both ends of the cable. The electronic is based on the FTDI FT232R USB to serial UART IC and it handles all the USB signalling and protocols. This cable is a USB powered with 2.0 full speed compatible and 2.5m cable that supports data transfer rate up to 3Mbaud at TTL levels.

Features and Benefits

• Based on back to back FTDI FT232RQ devices
• Entire USB protocol handled by USB connector encapsulated electronics
• Lower operating (20mA) and USB suspend mode current (70μA)
• Operating temperature ranges between -40°C and 85° C
• Support for USB suspend and resume
• UHCI/OHCI/EHCI host controller compatible
• USB 2.0 full speed compatible
• USB Type A connector on both ends of cable

Applications

• File transfer between PCs
• Password protected file transfer between PCs
• PC to PC networking using USB port

Certifications

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specifications
Attribute Value
Interface Function USB
Kit Name Null Modem Cable
121 In stock for delivery within 3 working days
Price Each
SGD 53.75
(exc. GST)
SGD 57.51
(inc. GST)
units
Per unit
1 +
SGD53.75
Related Products
These modules are MCU to USB host controller ...
Description:
These modules are MCU to USB host controller development modules for the Vinculum VNC1L device. They are supplied on a PCB designed to fit into 24-pin or 40-pin DIP sockets and provide access to the UART, parallel FIFO and SPI ...
The LC234X module provides a low cost USB ...
Description:
The LC234X module provides a low cost USB to UART bridge using the FT234XD IC to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...
The USB-COM-PLUS modules provide a simple method of ...
Description:
The USB-COM-PLUS modules provide a simple method of adapting legacy serial devices with RS-232, RS-422 or RS-485 interfaces to modern USB ports. The USB-COM232-PLUS1 module is a single channel USB to RS-232 communication device. Utilises the FTDI FT232RThe USB-COM232-PLUS2 module ...
These USB to RS-232 / RS-422 / RS-485 ...
Description:
These USB to RS-232 / RS-422 / RS-485 converters provide a fast and simple method to convert serial UART to USB. The USB connector contains a small circuit board featuring the FTDI FT232RQ (RS 730-0168) serial UART interface IC to ...