FTDI Chip, Type A USB Interface Board, VDRIVE2

  • RS Stock No. 429-296
  • Mfr. Part No. VDRIVE2
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

VDRIVE2 MCU to USB Host Controller Development Module, FTDI Chip

The VDrive2 module provides an easy solution for adding a USB Flash disk interface to an existing product. Only four signal lines plus 5V supply and ground are required to be connected.

One USB "A" socket to connect to a USB Flash Drive
Link selectable UART or SPI interface
Easy to implement command set
Traffic indicator LED

FTDI Chip USB Interface Board

The FTDI chip USB interface board is possibly the easiest solution for adding a USB flash drive interface to an existing product. The module features a USB connector interface connected to the VNC1L USB Host controller. The module provides a simple 4-signal interface supporting easy connectivity to an external device via UART or SPI. The connector interface also features 5V and ground connections. It is ideal for evaluation and development of VNC1L designs.

Features and Benefits

• 8-pin connector with 2mmpitch
• 8-way header interconnect cable provided
• Enclosure with snap in place clips allows for easy front panel mounting
• Jumper selectable UART or SPI interfaces
• Program or update firmware via USB Flash disk or via UART interface
• Traffic indicator LED
• USB ’A’ type socket to connect USB flash disk
• Uses Vinculum VDAP firmware and command set

Applications

• Communication
• Embedded system

Certifications

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specifications
Attribute Value
Interface Function USB
Kit Classification Interface Board
Kit Name Type A
504 In stock for delivery within 3 working days
Price Each
SGD 35.92
(exc. GST)
SGD 38.43
(inc. GST)
units
Per unit
1 - 9
SGD35.92
10 - 49
SGD35.91
50 - 99
SGD34.13
100 - 249
SGD34.11
250 +
SGD32.78
Related Products
The FT245B and FT245R are USB to parallel ...
Description:
The FT245B and FT245R are USB to parallel FIFO converter interfaces. Single chip USB to parallel FIFO bidirectional data transfer interfaceEntire USB protocol handled on the chip - No USB-specific firmware programming requiredFT245B USB compatibleFT245R USB 2.0 Full Speed compatibleFT245R ...
The LC231X module provides a low cost USB ...
Description:
The LC231X module provides a low cost USB to UART bridge using the FT231X IC to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...
The FTDI Chip TTL-232x USB to Serial UART ...
Description:
The FTDI Chip TTL-232x USB to Serial UART (TTL level) converter cables provide a simple and fast way to convert microcontroller UART serial I/O to USB. The TTL-232R contains a small circuit board which includes the FT232x chip. Encapsulated in ...
These USB to RS-232 / RS-422 / RS-485 ...
Description:
These USB to RS-232 / RS-422 / RS-485 converters provide a fast and simple method to convert serial UART to USB. The USB connector contains a small circuit board featuring the FTDI FT232RQ (RS 730-0168) serial UART interface IC to ...