Megger MIT220, Insulation & Continuity Tester, 500V dc, 999MΩ, CAT III 300V

  • RS Stock No. 535-3185
  • Mfr. Part No. MIT220-EN
  • Manufacturer Megger
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Megger Insulation and Continuity Tester

The Megger 1000Mohm insulation and continuity tester incorporates a range of safety and operation features in one of the smallest electrical insulation testers available. Its LCD offers a combination of digital readout and analogue display, with an analogue pointer response for evaluating circuit charge and discharge characteristics. The instrument housing is in tough ABS.
Supplied with
6 x AA alkaline batteries, test leads crocodile clips, carry case and instructions.

Features and Benefits

250V to 500V test voltage
Dual and triple test voltages models
Digital display with electronic analogue arc display helps to confirm insulation condition and to monitor fluctuating readings not apparent on the digital display
Continuity testing at 200mA down to 0.01ohm resolution
Automatic discharge of circuit under test
1mA test current at selected voltage range
Default voltmeter automatically switches on when the instrument is connected to a circuit with an AC or DC voltage greater than 25V
Auto ranging analogue arc scale shows only the scale in use
Live circuit warning above 25V, also inhibits insulation and continuity tests above 50V
Lead resistance compensation on continuity
Hands free continuity testing auto power down after 5 minutes
Operating temperature ranges between -10°C and 55°C

Applications

Domestic sites
Commercial sites
Industrial sites

Certifications

BS7671
BS76713-02
BS76713-03
BS76713-04
BS76713-06
BS76713-08
BS76413-04-04
EN61557-1
IEC 1010-1
IP40 rated

Specifications
Attribute Value
Tester Type Insulation & Continuity Tester
Minimum Test Voltage 250V
Maximum Test Voltage 500V dc
Maximum Insulation Resistance Measurement 999MΩ
Display Type LCD
Test Current 200mA
Battery Life 3000 5-Second Tests
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Power Source Battery
Safety Category Level CAT III
Safety Category Voltage 300V
Safety Category CAT III 300V
Width 98mm
Weight 530g
Length 195mm
Model Number p MIT220
Height 40mm
Battery Type AA
Dimensions 195 x 98 x 40mm
18 In stock for delivery within 4 working days
Price Each
SGD 738.44
(exc. GST)
SGD 790.13
(inc. GST)
units
Per unit
1 +
SGD738.44
Related Products
The Fluke 1660 series multifunction installation tester with ...
Description:
The Fluke 1660 series multifunction installation tester with an insulation test voltage of 50V, 100V, 250V, 500V, 1000V and with FlukeView® Forms documenting software. It ensures the safe and correct installation of fixed wiring to meet the necessary requirements. It ...
Insulation resistance testers are used to ensure the ...
Description:
Insulation resistance testers are used to ensure the insulation of wiring is safe, or undamaged after electrical work has been carried out. Testers or megohmmeters are vital in preventing tripped fuses, electrical equipment and instrument breakdown, risk of electric shock ...
The DT-500 checks insulation resistance for systems or ...
Description:
The DT-500 checks insulation resistance for systems or devices.A 500 V measuring voltage delivered by the device is used to perform this check (in compliance with NF C15-100).Phase / neutral shunt function.Battery-saving function.Live voltage indicator and battery status indicator.Belt clip ...
Digital/analogue display with backlightingSelect the testing voltage for ...
Description:
Digital/analogue display with backlightingSelect the testing voltage for a variety of applicationsAutomatic dischargeSensor head with extra activation buttonDetects live switchesAdjustable threshold alarm (good/poor testing)Auto power off functionSafety: CAT III 600VProtection rating: IP54.