Amphenol 16-Way IDC Connector Plug for Cable Mount, 2-Row

  • RS Stock No. 739-1079
  • Mfr. Part No. TMM-2-0-16-1
  • Manufacturer Amphenol
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

IDC Paddle Board Connectors

These Amphenol IDC TMM MicroMatch 1.27 mm pitch range of male Paddle Board Connectors are for Wire to Board connections. The ribbon wire size for these TMM MicroMatch Connectors is 1.27 mm pitch 28AWG

Note

For 1.27 mm pitch 28 AWG Ribbon cable see stock numbers 289-9925 or 105-5051 (26 way) typical.

1.27mm IDC - Amphenol TMM Range

A range of Amphenol TMM MicroMatch 1.27 mm pitch (staggered contact spacing) Board to Board or Wire to Board connectors rated at 1.5 A, 230 Vac RMS 60 Hz, DC. These TMM MicroMatch connectors are available in even number of positions from 4 to 26. All the TMM MicroMatch contacts are fully tinned with the PCB tails also being kinked to improve header retention during soldering operations. Locking latches are available on the female TMM MicroMatch connectors and the male connectors have a polarization guide to ensure correct orientation.

Specifications
Attribute Value
Number of Contacts 16
Number of Rows 2
Gender Male
Pitch 1.27 mm, 2.54 mm
Mounting Type Cable Mount
Body Orientation Right Angle
Termination Method Solder
Current Rating 1A
Contact Plating Tin
Series TMM
Minimum Operating Temperature -40°C
Maximum Operating Temperature +105°C
Housing Material Thermoplastic
Contact Material Beryllium Copper
2560 In stock for delivery within 3 working days
Price Each (In a Pack of 5)
SGD 0.634
(exc. GST)
SGD 0.678
(inc. GST)
units
Per unit
Per Pack*
5 - 120
SGD0.634
SGD3.17
125 - 370
SGD0.584
SGD2.92
375 - 995
SGD0.542
SGD2.71
1000 - 1995
SGD0.506
SGD2.53
2000 +
SGD0.476
SGD2.38
*price indicative
Packaging Options:
Related Products
A range of low profile 1.27 mm Pitch ...
Description:
A range of low profile 1.27 mm Pitch Picoflex Headers for use with 90327 Series housings, see stock number 324-8047 typical. Fitted with friction lock, polarisation and stamped contacts with in-line flat tabsRigid solder tails require 0.8mm hole.
SEK-18 Series 2.54mm female IDC connectors with central ...
Description:
SEK-18 Series 2.54mm female IDC connectors with central polarization available with up to 64 contacts. These SEK-18 cable mount IDC socket connectors are available with open or closed end covers and versions are available with a strain relief.Part numbers 0918xxxx7803 ...
AMPMODU MTE 2.54mm IDC pin assemblies with integral ...
Description:
AMPMODU MTE 2.54mm IDC pin assemblies with integral latching and polarization. These MTE 2.54mm IDC plug assemblies are made from black 94V-0 rated thermosplastic, have phosphor bronze IDC crimp contacts with a choice of platings (please refer to table) and ...
1.27mm QF-50 IDC single beam vertical MIL/DIN version ...
Description:
1.27mm QF-50 IDC single beam vertical MIL/DIN version ribbon cable/wire trap female connectors with an upper housing pre-loaded with gold plated phosphor bronze IDC contacts. These QF-50 single beam ribbon cable/wire trap connectors are fully shrouded with a 90 degree ...