Maxim DS2484R+T, I2C Translator, 6-Pin SOT-23

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Maxim I2C Translator

The Maxim SOT-23 package 6-pin I2C to 1 wire bridge device translator that interfaces directly to standard (100kHz max) or fast (400kHz max) I2C masters to perform protocol conversion between the I2C master and any downstream 1-Wire slave devices. Relative to any attached 1 wire slave device, it is a 1 wire master. Internal, user-adjustable timers relieve the system host processor from generating time-critical 1 wire waveforms, supporting both standard and overdrive 1 wire communication speeds.

Features and Benefits

• 1 wire port can be powered down under software control
• Adjustable 1 wire timing for tRSTL, tMSP, tW0L, and tREC0
• Built-in ESD protection
• Built-in level translator
• I2C operating voltages: 1.8V ±5%, 3.3V ±10% and 5.0V +5/-10%
• Operating temperature ranges between -40°C and 85°C
• Standard and overdrive 1 wire communication speeds
• Supports power-saving sleep mode (SLPZ pin), where the 1 wire port is in high impedance

Applications

• Cell phones
• Industrial sensors
• Medical instruments
• Printers

Note

Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase.

Specifications
Attribute Value
Mounting Type Surface Mount
Package Type SOT-23
Pin Count 6
Dimensions 3 x 1.75 x 1.3mm
Bi-Directional Yes
Length 3mm
Width 1.75mm
Height 1.3mm
Maximum Operating Supply Voltage 5.25 V
Maximum Operating Temperature +85 °C
Minimum Operating Supply Voltage 1.71 V
Minimum Operating Temperature -40 °C
Temporarily out of stock - back order for despatch 18/08/2020, delivery within 3 working days from despatch date
Price Each (On a Reel of 3000)
SGD 1.449
(exc. GST)
SGD 1.55
(inc. GST)
units
Per unit
Per Reel*
3000 - 3000
SGD1.449
SGD4,347.00
6000 +
SGD1.413
SGD4,239.00
*price indicative
Related Products
Use our solutions to improve signal integrity between ...
Description:
Use our solutions to improve signal integrity between lower drive outputs and higher loads. They include mixed 5 V and 3.3 V applications, with low propagation delay, and improved current drive and signal levels. Great in standard and advanced systems ...
The 74HC541: 74HCT541 is an octal non-inverting buffer/line ...
Description:
The 74HC541: 74HCT541 is an octal non-inverting buffer/line driver with 3-state outputs. The device features two output enables (OE1 and OE2). A HIGH on OEn causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the ...
Industry-standard Advanced Ultra-low Power (AUP) logic family products ...
Description:
Industry-standard Advanced Ultra-low Power (AUP) logic family products for ultra-low power consumption, small footprint logic solutions for use in 1.8 V and mixed 1.8 V / 3.3 V circuit applications. The AUP logic family offers the following features:. Wide supply ...
The 74HC4051-Q100, 74HCT4051-Q100 is a high-speed Si-gate CMOS ...
Description:
The 74HC4051-Q100, 74HCT4051-Q100 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). The 74HC4051-Q100, 74HCT4051-Q100 is an 8-channel analog multiplexer/demultiplexer with three digital select inputs (S0 to S2), an active-LOW enable input (E), eight ...