2 x 36 W, Bulkhead Light Fitting, 1, 2, 21, 22, Fluorescent, Temp T4, T5

  • RS Stock No. 781-2572
  • Mfr. Part No. EVS240EMA
  • Manufacturer DTS
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Emergency Hazardous Fitting, Zone 1, 2, 21 & 22 Ex-e

The EVS-EMA Series from DTS is an emergency lighting hazardous area Ex e fluorescent luminaries, is designed for use in Zone 1, 2, 21, and 22 areas, allowing the same emergency luminaries to be used across the whole of a hazardous area site at the same time meeting the requirements of the evacuation standards. The EVS-EMA ATEX luminaries combine high quality with a large range of features.

Main body constructed of a GRP for high impact strength
Polycarbonate diffuser to resist harsh and corrosive environments
Electronic ballast 220- 240V 50/60Hz
Battery duration 3 hours
Emergency fluorescent fitting with automatic test 5 wire Loop
Clear LED for easy visual battery inspection
Automatic switch off upon opening for safe maintenance
All components mounted on hinged and removable gear tray
Easy access for installation and maintenance
Lamp not included


EN60079-.0, 60079-1, 60079-5, 60079-7, 61241-1
LCIE 11 ATEX 3065X
IEC Ex LCI 11,0053X
Ex II 2 G
Ex de IIC T4 Gb for ≤ -40°C to ≤ +60°C
Ex de IIC T5 Gb for ≤ -40°C to ≤ +35°C
Ex II 2 D, Ex tb IIIC T85°C Db IP6x
IEC 60529 (2001) IP66

Supplied with

One nylon M20 cable gland cable (6-12mm), two M20 nylon plugs & two zinc plated steel brackets for ceiling mounting (V015)

Emergency Light Fittings

There are two basic types of emergency lighting luminaires - maintained and non-maintained. Maintained,These luminaires have the advantage of being able to be switched between the maintained function (lamp illuminated at all times) and non-maintained (lamp off until power supply fails), making them ideal for applications such as corridors, workshops and permanently illuminated emergency exit signs.The maintained luminaires also have the facility of being switched in banks of up to ten units. Non-maintained,These luminaires are only illuminated on a failure of the mains supply. Ideal for emergency exits, switchrooms and storage areas.

Attribute Value
Type Bulkhead
Zone Classification 1, 2, 21, 22
Temperature Classification T4, T5
Wattage 2 x 36 W
Lamp Type Fluorescent
Individual Lamp Wattage 36W
Number of Lamps 2
Hazardous Area Certification ATEX
1 In stock for delivery within 3 working days
Price Each
SGD 1,533.01
(exc. GST)
SGD 1,640.32
(inc. GST)
Per unit
1 +
Related Products
Body and frame in strong pressure die-cast LM6M ...
Body and frame in strong pressure die-cast LM6M highly corrosion resistant aluminiumTextured black full polyester powder finishCover frame retained on two stainless steel safety chainsPrismatic polycarbonate lensFixings outside gasket line to preserve IP ratingAluminium gear tray with LED bar60,000 hour ...
Strong pressure die-cast LM24 aluminium bodyTextured black, full ...
Strong pressure die-cast LM24 aluminium bodyTextured black, full polyester powder finish as standardHinged satin flame-retardant polycarbonate coverTamper-resistant cover screws as standardBezel trim for semi-recessed mounting60,000 hour LED life expectancyFitted with 4000K LEDs.
The Thorlux REALTA high performance LED luminaire is ...
The Thorlux REALTA high performance LED luminaire is designed to minimise light pollution and energy consumption. Fitted with 5000K high performance light bar LEDsGraphite full polyester powder finishStrong die-cast LM2 aluminium bodyHigh efficiency prismatic polycarbonate front refractorHighly specular, ...
This IP65 Led bulkhead features die-cast aluminium base ...
This IP65 Led bulkhead features die-cast aluminium base and cover, polycarbonate opal diffuser, grey powder coated finish and steel gear tray. This LED bulkhead offers an energy saving and cost effective solution compared to standard bulkhead luminaires. The Microwave sensor ...