Advance Tapes AT8 Green/White PVC 33m Hazard Tape, 0.14mm Thickness
- RS Stock No.:
- 711-996
- Mfr. Part No.:
- AT8
- Manufacturer:
- Advance Tapes
Stock check temporarily unavailable - call for stock availability
Added
Price Each
SGD28.38
(exc. GST)
SGD30.93
(inc. GST)
| Units | Per unit |
| 1 + | SGD28.38 |
- RS Stock No.:
- 711-996
- Mfr. Part No.:
- AT8
- Manufacturer:
- Advance Tapes
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
Hazard Warning Tapes
Hazard warning tapes help to meet statutory health and safety regulations. The colours are used for marking as indicated below.,Black/Yellow:,Radio active substances, width and height ,restrictions, moving equipment and obstructions,Red/White:,Fire fighting equipment, no smoking areas and flammable substances,Green/White:,Safety equipment, first aid points, emergency escape routes and safe areas
A low stretch PVC that will not shrink back or lift once applied
Very high adhesion level, adheres well long term to rough surfaces
Good abrasion resistance, stands up well to foot and machinery traffic
Flexible and easy to apply round irregular surface
Roll length 33m
Widths vary (see table)
For indoor and outdoor use
Very high adhesion level, adheres well long term to rough surfaces
Good abrasion resistance, stands up well to foot and machinery traffic
Flexible and easy to apply round irregular surface
Roll length 33m
Widths vary (see table)
For indoor and outdoor use
Specifications
Attribute | Value |
|---|---|
| Colour | Green/White |
| Tape Type | Hazard Tape |
| Backing Material | PVC |
| Width | 50mm |
| Length | 33m |
| Thickness | 0.14mm |
| Pre-printed | None |
| Adhesion Strength | 3.5 N/cm |
| Tensile Strength | 26N/cm |
| Elongation at Break | 150% |
| Maximum Operating Temperature | +60°C |
| Minimum Operating Temperature | 0°C |
| Adhesive Material | Rubber Resin |
| Model Number | AT8 |