IP67 Hall Effect Push Button Switch 9mA 1.25mA Plunger Pre-wired Linear, -40 → +85°C, 4.5 → 5.5 V

  • RS Stock No. 765-1172
  • Mfr. Part No. IHLR015XF2
  • Manufacturer Apem
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Apem Hall Effect Push Button Switches - IH Series

Apem IH series hall effect push button switches feature a very long life span due to the use of the hall effect to enable contactless switching up to 5 million operations. The IH series is also IP67 rated, further increasing its robustness. Apem has created two hall effect switch variants within this series, the IHS and the IHL.

Switch or linear variants
5 million cycles
IP67 sealed

Hall effect sensor technology for reliable contactless switching and long life
Operating force: 6N ± 2N
Low behind-panel depth
Compact Ø12mm (.472) case

Apem IH series – IHS variant hall effect push button switches are momentary, designed to be subjected to a repetitive jogging in harsh environments. The IHS is recommended for applications where the switch is often activated, such as in applications where load positioning is critical, for example in material handling, loaders, lifts, trucks, buckets and shovels.

Hall effect sensor technology for reliable contactless switching and long life
Operating force: Modular
Low behind-panel depth
Compact Ø12mm (.472) case

Apem IH series IHL variant hall effect push button switches provide an output proportional to the actuator travel and are intended for applications where a simple on/off control might not be sufficient and where a linear output is preferable. Typical use of the IHL switch could be within applications where operators need to control motion and speed. The IHL switch is ideal for control valves or variable speed drives used within industrial controls, heavy duty equipment and handling.

Specifications
Attribute Value
Supply Current 9mA
Maximum Current Output 1.25mA
Switch Life 10000000Cycles
Actuator Type Plunger
Terminal Type Pre-wired
Output Type Linear
IP Rating IP67
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
Operating Temperature Range -40 → +85°C
Supply Voltage Range 4.5 → 5.5 V
19 In stock for delivery within 3 working days
Price Each
SGD 81.36
(exc. GST)
SGD 87.06
(inc. GST)
units
Per unit
1 - 4
SGD81.36
5 - 9
SGD74.43
10 - 24
SGD67.53
25 - 49
SGD60.61
50 +
SGD53.71
Related Products
Clear polycarbonate spring-loaded hinged covers which prevent the ...
Description:
Clear polycarbonate spring-loaded hinged covers which prevent the accidental operation of a push-button switch and can be wired closedThe guard should be assembled to the switches prior to installation in a panel.
From EAO, the 04 Series of Twist release ...
Description:
From EAO, the 04 Series of Twist release stop-switches are designed to prevent "teasing" of the actuator which can result in premature contact operation. The design also eliminates the possibility of the push button action being blocked by lodged foreign ...
From Apem, this 1200 series push-button switch is ...
Description:
From Apem, this 1200 series push-button switch is single pole with a momentary action and a low-resistance plunger style actuator. Panel mounting and featuring 0.250in faston terminals, this Apem switch is easy to install.A push button boot (stock no: 103-6303) ...
Range of modular frame switches with miniature buttons, ...
Description:
Range of modular frame switches with miniature buttons, allowing many combinations and applications.Switch or pushbutton function in the same body (by removing the jumper).Outputs: one side for fitting to the PCB, the other to the wire.