Honeywell Ratiometric Hall Effect Sensor switching current 1.5 mA supply voltage 4.5 → 10.5 V dc

  • RS Stock No. 216-6231
  • Mfr. Part No. SS495A
  • Manufacturer Honeywell
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

Miniature Ratiometric Linear Hall Effect Sensors

Hall effect sensors with output proportional to supply voltage and the strength of the magnet field
Single current sinking or current sourcing linear output
Rail-to-rail operation provides more useable signal for higher accuracy
Responds to either positive or negative gauss
Good temperature stability
Typical applications include; current sensor, motor control, position control, encoder, metal detection, vibration sensor etc

Specifications
Attribute Value
Output Type Ratiometric
Supply Voltage 4.5 → 10.5 V dc
Terminal Type PCB
Switching Current 1.5 mA
Length 4.06mm
Width 3mm
Depth 1.6mm
Dimensions 4.06 x 3 x 1.6 mm
Maximum Operating Temperature +150°C
Minimum Operating Temperature -40°C
4321 In stock for delivery within 3 working days
Price Each
SGD 3.53
(exc. GST)
SGD 3.78
(inc. GST)
units
Per unit
1 - 9
SGD3.53
10 +
SGD3.38
Related Products
ABS housingOpen collector PNP + NPN OutputNormally open ...
Description:
ABS housingOpen collector PNP + NPN OutputNormally open contact with bounce free operationLED indication of alignment and diagnosisSpecified magnet assembly must be used with this sensorSealed to IP65Cable length 145mmDimensions 32 x 24 x 10 mm.
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
The Cherry GS1001 series of gear tooth sensors ...
Description:
The Cherry GS1001 series of gear tooth sensors are hall effect sensors that are designed for use in applications where ferrous edge detection or near zero speed sensing is required. Stainless steel housingHigh speed capabilityImmune to rotational alignmentSinking (Open Collector) ...
The Cherry GS1005 - GS1007 series of gear ...
Description:
The Cherry GS1005 - GS1007 series of gear tooth speed sensors are hall effect sensors that are designed for use in applications where ferrous edge detection or near zero speed sensing is required. Aluminium housingHigh speed capabilityImmune to rotational alignmentCompatible ...