Honeywell Digital Hall Effect Sensor switching current 50 mA supply voltage -1 → +25 V dc

  • RS Stock No. 169-7672
  • Mfr. Part No. SR13C-A1
  • Manufacturer Honeywell
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MX
Product Details

SR13 and SR15 series Hall effect sensors

Hall effect sensors in plastic casing with wires.
Flat or quick fit snap-in casing for rapid assembly.
Used in association with a magnet.
Application in various types of detection, low cost.

Specifications
Attribute Value
Output Type Digital
Supply Voltage -1 → +25 V dc
Terminal Type Wire Lead
Maximum DC Voltage 25V
Switching Current 50 mA
Length 7.62mm
Width 20.32mm
Depth 11.43mm
Dimensions 7.62 x 20.32 x 11.43 mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +150°C
2 In stock for delivery within 4 working days
Price 1 Bag of 100
SGD 1,550.40
(exc. GST)
SGD 1,658.93
(inc. GST)
Bag(s)
Per Bag
Per unit*
1 +
SGD1,550.40
SGD15.504
*price indicative
Related Products
ifm electronic KG5 M18 capacitive sensors feature a ...
Description:
ifm electronic KG5 M18 capacitive sensors feature a 12-LED bar display to give visibility of sensor performance allowing the adaption of the switch point to suit the application conditions. The green LEDs either side of the switch point indicate the ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
M8 sealed inductive sensor, ultra-miniature for flush mounting."Normally ...
Description:
M8 sealed inductive sensor, ultra-miniature for flush mounting."Normally open" PNP switching function.Equipped with a red LED status display.Protected against short circuits and polarity reversal.Connected via 2 metre PUR cable or via M8 screwed connector, axial output.
M12 inductive detector, non flush-mountable."Normally open" PNP switching ...
Description:
M12 inductive detector, non flush-mountable."Normally open" PNP switching function.Equipped with a red LED status display.Protected against short circuits and polarity reversal.Connected via M12 screwed connector, axial output.