RS PRO Open Collector PNP + NPN Output Hall Effect Sensor switching current 250 mA supply voltage 7.5 → 24 V dc

  • RS Stock No. 285-144
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Rectangular

ABS housing
Open collector PNP + NPN Output
Normally open contact with bounce free operation
LED indication of alignment and diagnosis
Specified magnet assembly must be used with this sensor
Sealed to IP65
Cable length 145mm
Dimensions 32 x 24 x 10 mm

Note

For suitable magnet see Stock No 285-245

//media.rs-online.com/t_line/LI285245-20.gif
Specifications
Attribute Value
Output Type Open Collector PNP + NPN Output
Supply Voltage 7.5 → 24 V dc
Terminal Type Wire Lead
Switching Current 250 mA
Length 32mm
Width 24mm
Depth 10mm
Dimensions 32 x 24 x 10 mm
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
Housing Material ABS
Standards Met RoHS
IP Rating IP65
10 In stock for delivery within 3 working days
Price Each
SGD 36.32
(exc. GST)
SGD 38.86
(inc. GST)
units
Per unit
1 - 14
SGD36.32
15 +
SGD35.05
Related Products
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
Hall effect sensors with output proportional to supply ...
Description:
Hall effect sensors with output proportional to supply voltage and the strength of the magnet fieldSingle current sinking or current sourcing linear outputRail-to-rail operation provides more useable signal for higher accuracyResponds to either positive or negative gaussGood temperature stabilityTypical ...
Hall effect vanes with integrated magnet for detecting ...
Description:
Hall effect vanes with integrated magnet for detecting metal targets.Ideal for detection or counting applications that cannot be carried out with an infrared sensor.For use in dirty and dusty industrial environments.Vertical or lateral mounting, pin or wire output depending on ...
The Cherry GS1001 series of gear tooth sensors ...
Description:
The Cherry GS1001 series of gear tooth sensors are hall effect sensors that are designed for use in applications where ferrous edge detection or near zero speed sensing is required. Stainless steel housingHigh speed capabilityImmune to rotational alignmentSinking (Open Collector) ...