A1230LLTR-T Allegro Microsystems,, Bipolar Hall Effect Sensor, 8-Pin SOIC

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

A1230 Dual Channel Quadrature Hall Effect Bipolar Switch, Allegro Microsystems

The Allegro Microsystems A1230 is a dual-channel, bipolar switch with two Hall-effect sensing elements. Each element provides a separate digital output for speed and direction signal processing.

The Hall elements are aligned with an accuracy greater than 1 μm. This accuracy makes it ideal for use in ring magnet based, speed and direction systems located in harsh automotive and industrial environments.

The A1230 contains two independent Hall-effect bipolar switches located 1 mm apart. The digital outputs are out of phase so the outputs are in quadrature when interfaced with the proper ring magnet design. Low-drift amplifiers guarantee symmetry between the switches.

The Allegro high-frequency chopper-stabilisation cancels offsets in each channel providing stable operation over the full specified temperature and voltage ranges.

The A1230 is available in a plastic 8-pin SOIC surface mount package and a plastic 4-pin SIP.

AEC-Q100 automotive qualified
Two matched Hall-effect switches on a single substrate
1 mm Hall element spacing
Superior temperature stability and industry-leading jitter performance through use of advanced chopper stabilisation topology
Integrated LDO regulator provides 3.3 V operation
Integrated ESD protection from outputs and VCC to ground
High-sensitivity switchpoints
Robust structure for EMC protection
Reverse-battery protection on supply and both output pins

Hall Effect Sensors, Allegro MicroSystems

Attribute Value
Magnetic Type Bipolar
Mounting Type Surface Mount
Pin Count 8
Minimum Magnetic Sensor Release Point -30 Gs
Maximum Magnetic Sensor Operating Point 30 Gs
Minimum Operating Supply Voltage 3.3 V
Maximum Operating Supply Voltage 18 V
Length 4.9mm
Width 3.9mm
Height 1.47mm
Dimensions 4.9 x 3.9 x 1.47mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SOIC
Typical Magnetic Sensor Hysteresis 14 Gs
Temporarily out of stock - back order for despatch 16/06/2020, delivery within 3 working days from despatch date
Price Each (On a Reel of 3000)
SGD 4.595
(exc. GST)
SGD 4.917
(inc. GST)
Per unit
Per Reel*
3000 +
*price indicative
Related Products
The range of ABP piezoresistive silicon pressure sensors ...
The range of ABP piezoresistive silicon pressure sensors from Honeywell, are available in several variations of digital/analogue, SMT/DIP/LLSMT packages and pressure measurement ranges. Specifically for the measurement of gauge and differential pressure, the ABP sensors are suitable for medical applications ...
A Hall-effect sensor switch from IXYS suitable for ...
A Hall-effect sensor switch from IXYS suitable for low-power low-voltage applications. On-chip power management circuitry reduces the effective average current to just 5uA at 3V making the device ideal for portable devices. The MX887D is an omnipolar device and switches ...
Allegro’s diverse selection of speed sensor ICs provide ...
Allegro’s diverse selection of speed sensor ICs provide optimized solutions for many non-automotive applications where speed or speed and direction information are needed. These sensor ICs can handle designs using various target geometries, materials, and sensing orientations. Allegro’s portfolio of ...
The Allegro Microsystems A1220, A1221, A1222, and A1223 ...
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.A south pole ...