A1318LUA-2-T Allegro Microsystems,, Linear Hall Effect Sensor, 3-Pin SIP

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

Hall Effect Sensor ICs, Allegro Microsystems

The A1318LUA-2-T A1319LUA-5-T by Allegro Microsystems are Hall-effect sensor ICs that are designed to fit angular positions with a high accuracy and small package size.

The features of the Allegro A1318 and A1319 make them ideal for use in automotive and industrial applications requiring high accuracy, and operate across an extended temperature range, –40°C to 150°C linear Hall-effect sensor ICs have been designed specifically to meet these requirements. These temperature-stable devices are available in both surface-mount and through hole packages. The accuracy of each device is enhanced via end-of-line optimisation.

Each BiCMOS monolithic circuit integrates a Hall element, temperature-compensating circuitry to reduce the intrinsic sensitivity drift of the Hall element, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique. The A1318 and A1319 sensor ICs are offered in two package styles. The LH is a SOT-23W style, miniature, low profile package for surface-mount applications. The UA is a 3-pin, ultra-mini, single inline package (SIP) for through-hole mounting. Both packages are lead (Pb) free, with 100% matte tin leadframe plating.

3.3 V supply operation
QVO temperature coefficient programmed at Allegro™ for improved accuracy
Miniature package options
High bandwidth, low noise analog output
High speed chopping scheme minimizes QVO drift across operating temperature range
Temperature-stable quiescent voltage output and sensitivity
Precise recoverability after temperature cycling
Output voltage clamps provide short circuit diagnostic capabilities
Undervoltage lockout (UVLO)
Wide ambient temperature range: –40°C to 150°C
Immune to mechanical stress
Enhanced EMC performance for stringent automotive Applications

Hall Effect Sensors, Allegro MicroSystems

Specifications
Attribute Value
Magnetic Type Linear
Mounting Type Through Hole
Pin Count 3
Minimum Operating Supply Voltage 3 V
Maximum Operating Supply Voltage 3.6 V
Length 4.09mm
Width 1.52mm
Height 3.02mm
Dimensions 4.09 x 1.52 x 3.02mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SIP
Temporarily out of stock - back order for despatch when stock is available
Price Each (In a Bag of 500)
SGD 3.345
(exc. GST)
SGD 3.579
(inc. GST)
units
Per unit
Per Bag*
500 +
SGD3.345
SGD1,672.50
*price indicative
Related Products
Reduce switching noise of input gain control, mute, ...
Description:
Reduce switching noise of input gain control, mute, main volume, fader volume, bass, middle, treble, loudness, by using advanced switch circuit [Possible to control all steps]Built-in ground isolation amplifier inputs, ideal for external stereo inputBuilt-in differential input selector that can ...
This series supports common control software, increasing design ...
Description:
This series supports common control software, increasing design and development efficiency. Tone quality can be adjusted by parametric equalizer using no external components. The built-in three-band equalizer sub woofer output allows for a space saving design. Reduce switching noise of ...
The SY89853U features two, low jitter 2:1 differential ...
Description:
The SY89853U features two, low jitter 2:1 differential multiplexers with 100K LVPECL (800mV) compatible outputs, capable of handling clocks up to 2.5GHz and data streams up to 2.5Gbps. The SY89853U differential inputs include Micrel's unique, 3-input termination architecture that allows ...
Microchip 512-Kb FPGA configuration EEPROM with Altera Pinout ...
Description:
Microchip 512-Kb FPGA configuration EEPROM with Altera Pinout provides easy-to-use, cost-effective configuration memory for FPGAs. It comes in 8-lead PDIP and the 20-lead PLCC packages. This EEPROM can configure one or more FPGA devices through a simple serial-access procedure. Users ...