HMC1001 Honeywell,, Linear Magnetoresistive Sensor, 8-Pin

  • RS Stock No. 169-8128
  • Mfr. Part No. HMC1001
  • Manufacturer Honeywell
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

Magnetoresistive Sensors, HMC series

Magnetoresistive circuits, single axis and double axis comprising a Wheatstone bridge with 4 magneto resistive branches
Create a compensation field to eliminate an unwanted field (offset+, offset-)
Can be re-initialised in the event of drift
Measure movement or angular or linear positions
Highly sensitive - can detect the Earth's magnetic field
Minimal hysteresis and background noise
Typical uses: electronic compass, vehicle position monitoring, virtual reality etc.

Stock no. Bandwidth (MHz) Linearity Error Offset Strap (Ω) Package Style Max. Exposed Field Length (mm) Width (mm) Height (mm) Pin Pitch (mm)
216-6297 5 2% FS max. 2.5 typ. 8-pin SIP 1000 Gs 11.2 3.9 mm (7.3 inc. pins) 1.7 1.27
216-6304 5 2% FS max. 2.5 typ. 20-pin SOIC 1000 Gs 12.9 7.4 mm (10.5 inc. pins) 2.6 1.27

Magnetoresistive Sensors, Honeywell

Specifications
Attribute Value
Magnetic Type Linear
Mounting Type Through Hole
Pin Count 8
Minimum Operating Supply Voltage 5 V
Maximum Operating Supply Voltage 12 V
Length 11.25mm
Width 3.988mm
Dimensions 11.253 x 3.988 x 1.728mm
Minimum Operating Temperature -55 °C
Maximum Operating Temperature +150 °C
Temporarily out of stock - back order for despatch when stock is available
Price Each (In a Tube of 50)
SGD 29.629
(exc. GST)
SGD 31.703
(inc. GST)
units
Per unit
Per Tube*
50 +
SGD29.629
SGD1,481.45
*price indicative
Related Products
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
The Si7210 family of Hall-effect magnetic sensors from ...
Description:
The Si7210 family of Hall-effect magnetic sensors from Silicon Labs features an I2C interface which enables full configurability of the sensor operate and release points and allows measurement of the magnetic field strength. The Si7210 sensor integrates a chopper-stabilized Hall ...
A range of Hall-effect magnetic sensors from Silicon ...
Description:
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge ...
The omnipolar Hall ICs are magnetic switches that ...
Description:
The omnipolar Hall ICs are magnetic switches that can operate both S-and N-pole, upon which the output goes from Hi to Low. In addition to regular single-output Hall ICs, We offer a lineup of dual-output units with a reverse output ...