DRV5013AGQLPG Texas Instruments,, Bipolar Hall Effect Sensor Switch, 3-Pin TO-92

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

Hall Effect Switches & Latches, Texas Instruments

Integrated circuits utilising the Hall Effect to implement non-contact sensing, switching and latching functions.

Hall Effect Sensors, Texas Instruments

Specifications
Attribute Value
Magnetic Type Bipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point -9 mT
Maximum Magnetic Sensor Operating Point 9 mT
Minimum Operating Supply Voltage 2.5 V
Maximum Operating Supply Voltage 38 V
Length 4.1mm
Width 1.62mm
Height 3.25mm
Dimensions 4.1 x 1.62 x 3.25mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Package Type TO-92
Typical Magnetic Sensor Hysteresis 12 mT
Price Each (On a Reel of 1000)
SGD 0.567
(exc. GST)
SGD 0.607
(inc. GST)
units
Per unit
Per Reel*
1000 +
SGD0.567
SGD567.00
*price indicative
Due to temporarily constrained supply, RS is unable to accept backorders at this time
Related Products
A range of Hall Effect switching ICs from ...
Description:
A range of Hall Effect switching ICs from Infineon available with both standard and latching operation.
Description:
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional ...
Integrated circuits utilising the Hall Effect to implement ...
Description:
Integrated circuits utilising the Hall Effect to implement non-contact sensing, switching and latching functions.
The Allegro Microsystems A1230 is a dual-channel, bipolar ...
Description:
The Allegro Microsystems A1230 is a dual-channel, bipolar switch with two Hall-effect sensing elements. Each element provides a separate digital output for speed and direction signal processing.The Hall elements are aligned with an accuracy greater than 1 μm. This accuracy ...