Adafruit 2441, PiTFT Plus 3.5in Resistive Touch Screen Add On Board for Raspberry Pi

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

PiTFT Plus LCD TFT Touchsceens for Raspberry Pi, Adafruit

The PiTFT Plus are a range of TFT LCD resistive touchscreens designed specifically to fit neatly onto the top of a Raspberry Pi.

They are available with 3 screen sizes: 2.8, 3.2 and 3.5 inch.

These TFT LCD touchscreens work with the 2 x 20 connector so will not work with the very first original Pi but do work with all later generation Pi's. They use the high-speed SPI interface on the Pi and can be used as a console, X window port, displaying images or videos. You can also have an HDMI display separately connected.

How can you install it?

Four mounting ears can be used to attach the display & Pi to a bezel. They can also be snapped off with pliers if you want it to exactly match the Pi size.

A little bit about the display

Display current draw is mostly the backlight and at full power, the backlight draws around 100 mA. It uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. GPIO #18 can be used to PWM dim the backlight if you like. All other GPIO are unused. You can connect a 26-pin Pi GPIO cable to it. The other GPIO are broken out into solder pads at the bottom.

Features:

• Low power consumption, suitable for battery operated systems
• Image sticking eliminated function
• CMOS compatible inputs
• One chip solution for COG assembly
• 24-bits Input Image function
• Partial display mode
• Deep standby mode
• Normal black/normal white LCD
• Built-in internal OTP power

PiTFT Plus 2.8” TFT LCD Touchscreen 320 x 240 pixels (RS 124-5479)
PiTFT Plus 3.2” TFT LCD Touchscreen 320 x 240 pixels (RS 124-5491)
PiTFT Plus 3.5” TFT LCD Touchscreen 480 x 320 pixels (RS 124-5487)

Specifications
Attribute Value
Diagonal Display Size 3.5in
Display Technology Resistive Touch Screen
Kit Classification Add On Board
Kit Name PiTFT Plus
For Use With Raspberry Pi
59 In stock for delivery within 3 working days
Price Each
SGD 65.91
(exc. GST)
SGD 70.52
(inc. GST)
units
Per unit
1 +
SGD65.91
Related Products
The ISL79985-EVAL board evaluates the ISL79985, 4-Channel Differential ...
Description:
The ISL79985-EVAL board evaluates the ISL79985, 4-Channel Differential Input Analogue Video Decoder with MIPI CSI-2 output. The device is aimed at providing an all-around camera view for automotive ADAS applications. Four high-quality NTSC/PAL/SECAM video decodersSoftware selectable analogue input controlFour ...
Click accessory modules for use with MikroElektronika mikroBUS™ ...
Description:
Click accessory modules for use with MikroElektronika mikroBUS™ microcontroller development boards. The AlphaNum R click and G click boards are simple solutions for adding 14-segment alphanumeric displays to your devices. The boards have two TLC5926 16-bit constant-current LED sink drivers ...
A Click accessory module for use with MikroElektronika ...
Description:
A Click accessory module for use with MikroElektronika mikroBUS™ microcontroller development boards. The LED ring R click board has a circular 25mm diameter ring of 32 red LEDs which are sequentially driven by four 8-bit 74HC595 shift registers. The click ...
The Graphics Display Prototype Board (set of three) ...
Description:
The Graphics Display Prototype Board (set of three) provides an easy path to integrate a graphics LCD panel to one of the following platforms: PIC24FJ256DA210 development board (DM240312), Graphics LCD Controller PICtail™ Plus SSD1926 Board (AC164127-5). Microchip display connector V1Footprints ...