RS PRO Piston Inline Flow Switch, 0.1 L/min → 0.6 L/min,

  • RS Stock No. 510-0565
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Piston Flow Switch

Monitoring of low flow rates of liquids. A piston equipped with a magnet is displaced by the flow, this action is proportional to the flow rate against a supporting spring. A reed switch on the outside is positioned at the desired point within the control range. A signal is generated when the actual flow rate value is above or below the set value.

High pressure and temperature capabilities
Scaled switch point setting
Low flow switching capabilities
Installation independent of position
Material Brass

Note

If used on air system, life expectancy of the unit is greatly reduced due to instantaneous pressure loss on the piston, which has no damping.

Specifications
Attribute Value
Media Monitored Liquid
Device Type Piston Inline
Minimum Flow Rate 0.1 L/min
Maximum Flow Rate 0.6 L/min
Supply Voltage 200 V ac
Pipe Diameter Range 1/4 in
Connection Type 1/4 BSP
Maximum Pressure 300bar
Material Brass
Maximum Media Temperature +100°C
Maximum Operating Temperature +120°C
Current Rating 1 A
9 In stock for delivery within 4 working days
Price Each
SGD 344.92
(exc. GST)
SGD 369.06
(inc. GST)
units
Per unit
1 +
SGD344.92
Related Products
A unique, patented piston design assures accuracy within ...
Description:
A unique, patented piston design assures accuracy within 20% over a full range of viscosities - from 40 to 1000 SSU. Ideal for use in applications where liquids of different viscosities are blended; or for use in lubrication systems where ...
Dwyer Instruments TDFS series thermal flow switch uses ...
Description:
Dwyer Instruments TDFS series thermal flow switch uses impulse thermal dispersion measurement to indicate the flow rate. Thermal dispersion measurements offer benefits over traditional flow meters with no paddles or vanes to wear or break. The TDFS features set point ...
These slim, inline switches reduce pressure drop to ...
Description:
These slim, inline switches reduce pressure drop to a minimum. They incorporate a unique, dual-diameter, internal bore and piston configuration to minimise flow constriction. Liquids are able to pass around the piston and flow through the switch with little pressure ...
These rugged inline flow switches use 100 micron ...
Description:
These rugged inline flow switches use 100 micron filtration and are less susceptible to clogging than other high-pressure inline flow switches. The 1 piece magnetic PPS composite piston makes the FS-380 ideal for high-pressure applications such as industrial cleaning equipment. ...