Georg Fischer Variable Area Flow Meter, 50 l/h → 500 l/h, Short Version Series

Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): CH
Product Details

Georg Fischer Variable Are Flowmeter - Short Version

A shorter more compact version of George Fischer's 350 series variable flow meters. Fitted with standard size cement sockets with a threaded joint for easy installation and disconnection they also feature a easy to read scale and float stabilising rod on sizes above DN50 to aid accurate measurement taking.

Break-proof and corrosion-resistant
Low pressure loss
Suitable for liquids and gases
Volume and % scale
Install and remove radially with threaded joint
Wide dovetail guide for easy fastening of limit switches
Flow immediately visible with set-point indicators
Orange-coloured PVDF float makes it easy to read the flow
Fast connection with standardized cement socket

Specifications
Attribute Value
Media Monitored Liquid
Device Type Variable Area
Minimum Flow Rate 50 l/h
Maximum Flow Rate 500 L/h
Pipe Diameter Range Maximum of 32 mm
Connection Type DN25 Socket
Material Plastic
Series Short Version
5 In stock for delivery within 4 working days
Price Each
SGD 573.44
(exc. GST)
SGD 613.58
(inc. GST)
units
Per unit
1 +
SGD573.44
Related Products
Variable flow indicators with a float inside an ...
Description:
Variable flow indicators with a float inside an outer graduated flow scale on the viewing sleeve. All utilise the technique of differential pressure across a piston which, as the flow increases, moves the piston against a calibrated spring. Accuracy ±2% ...
This lightweight, compact flow sensor is intended as ...
Description:
This lightweight, compact flow sensor is intended as a low cost option for flow rates of 1 to 20 l/min with low pressure drop. Basic construction consists of a one piece sensor body housing a turbine rotor. Flow through the ...
The EASIFLOW is a flow measuring device incorporating ...
Description:
The EASIFLOW is a flow measuring device incorporating an AC-DC switch suitable for controlling valves or pump motors or for activating alarm signals. • Oil and water calibrated • Pressures up to 10 bar • Flows from 1 L/min to ...
Calibrated flow indicator with switched output specifically designed ...
Description:
Calibrated flow indicator with switched output specifically designed for use with water. Suitable for installation in any plane. Utilises the technique of differential pressure across a piston against a calibrated spring, with the flow rate read off a scale marked ...