Key Instruments Variable Area Flow Meter, 4 L/min → 50 L/min, MR3000 Series

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details
//media.rs-online.com/t_line/L198289-01.gif
//media.rs-online.com/t_line/LF198289-01.gif

Key Instruments Flow Meter

The Key Instruments MR3000 series variable area flow meter measures the gas flow rate of 4L/min to 50L/min. This is a high tech, moulded, low cost manufactured from high impact polycarbonate. It can operate at pressures of 100psig and temperatures of 150°F (65°C). These economically designed units provide high-quality and accuracy when installing properly. The durability of the polycarbonate allows the flow meter to provide years of trouble-free service. It is supplied with scales in LPM and SCFH for air, or CCM and GPH for water.

Inclusions:
Mounting brackets and built-in bezel.

Features and Benefits

Pipe diameter range is 1/8 in
Connection type is 1/8 NPT female
Maximum operating pressure is 6.9bar
Maximum operating temperature is 65°C
high-quality construction
10:1 turn direct reading scales
Monitor or control air and water flow
Supplied with east to read 10:1 turn direct reading scales
Fittings made of brass
Seal material is VITON W/ stainless steel

Applications

It is use with air and water
Ideally suited for OEM applications

Specifications
Attribute Value
Media Monitored Gas
Device Type Variable Area
Minimum Flow Rate 4 L/min
Maximum Flow Rate 50 L/min
Pipe Diameter Range 1/8 in
Connection Type 1/8 NPT Female
Maximum Pressure 6.9bar
Material Polycarbonate
Maximum Media Temperature +65°C
Maximum Operating Temperature +65°C
Series MR3000
79 In stock for delivery within 4 working days
Price Each
SGD 139.78
(exc. GST)
SGD 149.56
(inc. GST)
units
Per unit
1 - 5
SGD139.78
6 - 11
SGD134.97
12 +
SGD133.31
Related Products
The AWM2000 Series microbridge mass airflow sensor is ...
Description:
The AWM2000 Series microbridge mass airflow sensor is a passive device comprised of two Wheatstone bridges. The heater control circuit is required for operation per specifications. The sensing bridge supply circuit is also required for operation per specifications. The differential ...
Like the AWM2000 Series, the dual Wheatstone bridges ...
Description:
Like the AWM2000 Series, the dual Wheatstone bridges in the AWM3000 series control airflow measurement. The AWM3000 Series is amplified; therefore, it can be used to increase the gain and to introduce voltage offsets to the sensor output. The heater ...
The EASIFLOW is a flow measuring device incorporating ...
Description:
The EASIFLOW is a flow measuring device incorporating an AC-DC switch suitable for controlling valves or pump motors or for activating alarm signals. • Oil and water calibrated • Pressures up to 10 bar • Flows from 1 L/min to ...
Calibrated flow indicator with switched output specifically designed ...
Description:
Calibrated flow indicator with switched output specifically designed for use with water. Suitable for installation in any plane. Utilises the technique of differential pressure across a piston against a calibrated spring, with the flow rate read off a scale marked ...