ifm Electronic, 100 → 1000 cm³/s Flow Controller, Cable, Relay, 80 → 250 V ac/dc, LED

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Airflow Sensor/Switch

Working on the calorimetric principle these sensors have a working range of 1 to 10m/sec (air velocity) and can be set to give an output signal should the airflow drop below the preset level.

Suitable for monitoring in HVAC applications
LED status indication of power/airflow
Insertion depth; 32mm (min), 120mm (max)
Switching point continuously adjustable
Dimensions: Length 140mm, Diameteter 23mm
Supplied with mounting clamp and installation instructions

//media.rs-online.com/t_line/L182988-01.gif
//media.rs-online.com/t_line/LD182988-01.gif
//media.rs-online.com/t_line/LE182988-02.gif

ifm electronic Airflow Sensor/Switch

The ifm electronic airflow sensor/switch can sense a maximum flow rate of 1000cm³/s working on the calorimetric principle. It has a supply voltage rating ranging between 80VAC/DC and 250VAC/DC. The immersion depth into the duct can be flexibly varied via the supplied mounting clamp. This sensor has a working range of 1 to 10m/sec (air velocity) and can be set to give an output signal should the airflow drop below the preset level.

Features and Benefits

• Reliable airflow monitoring
• User-friendly setting of the requested immersion depth of the sensor
• Intuitive setting of the switch point via a potentiometer
• Signal output via potential-free relay contacts
• LED status indication of power/airflow
• Insertion depth is 32mm (minimum), 120mm (maximum)
• Switching point continuously adjustable
• Dimensions: Length is 140mm Diameter is 23mm
• Supplied with mounting clamp and installation instructions
• Pipe diameter range is 23mm

Applications

• Ventilation systems in building automation
• Airflow monitoring in ventilation systems and/or suction operations
• Monitoring in HVAC applications

Certifications

• CE certified
• UL listed
• DIN EN 61000-6-2
• DIN EN 61000-6-3
• CRN certified
• IP65 rated

Specifications
Attribute Value
Maximum Flow Rate 100 → 1000 cm³/s
Electrical Connection Cable
Control Output Relay
Supply Voltage 80 → 250 V ac/dc
Display Screen LED
Pipe Diameter Range 23 mm
Minimum Operating Temperature -10°C
Maximum Operating Temperature +50°C
35 In stock for delivery within 4 working days
Price Each
SGD 186.11
(exc. GST)
SGD 199.14
(inc. GST)
units
Per unit
1 - 5
SGD186.11
6 +
SGD179.17
Related Products
Series IR Precision Regulators are designed to be ...
Description:
Series IR Precision Regulators are designed to be compact and light weight. The maximum set pressure has been expanded from the conventional 0.7MPa to 0.8MPa. Relief flow has been increased by nearly 5 times (compared to SMC IR201, IR401).
Two wall mounting control units and adaptor mount ...
Description:
Two wall mounting control units and adaptor mount transmitter module designed to provide precise control of liquid flow quantities. Induces a measured frequency into a transducer which is proportional to the flow rate. Selectable dosage mode, overfill correction, allocation of ...
Sensor and signal processor in one stainless steel ...
Description:
Sensor and signal processor in one stainless steel compact housingOn-delay time: 8s (typical)Ingress protection to IP67Simple adjustment via LED bar graph and potentiometerResponse time: 12s max.Switch on and off times: 2s typicalOutput - PNP transistor; short-circuit proof; reverse polarity protectedFluid ...
Compact switches with moving magnet reed contacts specifically ...
Description:
Compact switches with moving magnet reed contacts specifically designed for monitoring maximum/minimum flow values. The switches fit a range of connection bodies. Suitable for neutral fluids, oils, water up to +50°C as well as acidic and alkaline solutionsMechanical adjustment of ...