Nexperia 74HCT74D Dual D Type Flip Flop IC, 14-Pin SOIC
- RS Stock No. 166-1291
- Mfr. Part No. 74HCT74D
- Manufacturer Nexperia
The 74HC74 and 74HCT74 are dual positive edge triggered D-type flip-flop. They have individual data (nD), clock (nCP), set (nSD) and reset (nRD) inputs, and complementary nQ and nQ outputs. Data at the nD-input, that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition, is stored in the flip-flop and appears at the nQ output. Schmitt-trigger action in the clock input, makes the circuit highly tolerant to slower clock rise and fall times.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Key applications
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems
74HCT Family
| Attribute | Value |
|---|---|
| Logic Family | HCT |
| Logic Function | D Type |
| Input Type | Single Ended |
| Output Signal Type | Differential |
| Triggering Type | Positive Edge |
| Polarity | Inverting, Non-Inverting |
| Mounting Type | Surface Mount |
| Package Type | SOIC |
| Pin Count | 14 |
| Set/Reset | Yes |
| Number of Elements per Chip | 2 |
| Maximum Propagation Delay Time @ Maximum CL | 53 ns @ 4.5 V |
| Dimensions | 8.75 x 4 x 1.45mm |
| Minimum Operating Supply Voltage | 4.5 V |
| Width | 4mm |
| Maximum Operating Temperature | +125 °C |
| Maximum Operating Supply Voltage | 5.5 V |
| Height | 1.45mm |
| Length | 8.75mm |
| Propagation Delay Test Condition | 50pF |
| Minimum Operating Temperature | -40 °C |
