Microchip LAN9355/ML, 3-Port Ethernet Switch IC, MII/RMII/Turbo MII, 10 Mbps, 100 Mbps 1.8 → 3.3 V, 88-Pin QFN

  • RS Stock No. 178-4144
  • Mfr. Part No. LAN9355/ML
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

LAN9355 3-Port 10/100 Ethernet Switch

The Microchip LAN9355 is a high performance 3-Port 10/100 Managed Ethernet Switch IC with RMII.
The Microchip LAN9355 is a high performance 3-Port 10/100 Managed Ethernet Switch IC. The device supports a dual MII/RMII/Turbo MII to offer up to 200 Mbps network speeds.

The device offers a virtual PHY feature that mimics a single PHY connection through the MII/RMII/Turbo MII interface to the host SoC that can simplify software development. This feature also allows system designers to swap the single PHY and Ethernet switch to create multiple SKUs from the same software driver.

The LAN9355 integrates all the functions of a 10/100 switch system including the Switch Fabric, Packet Buffers, Buffer Manager, MACs, PHY Transceivers and Serial Management. IEEE 1588v2 is supported via an integrated Hardware Time Stamp Unit, which supports end-to-end and peer-to-peer transparent clocks.

Features

IEEE 802.1Q VLAN support (up to 16 VLAN groups)
IEEE 1588-2008 Hardware Time Stamping Unit
Up to 200 Mbps network speed via a Turbo MII interface
Compliant with IEEE 802.3az Energy Efficient Ethernet
Wake on LAN (WoL) support
IGMP v1/v2 monitoring for multicast packet filtering
Optional EEPROM or external CPU serial management support via an I2C™ interface
Virtual PHY feature to simplify software development by mimicking multiple switch ports as a single-port PHY
Comprehensive power management features
Cable diagnostic support
Integrated regulators requiring a single 3.3 V supply
42 per-port MIB counters for efficient network management

Ethernet Communications - Microchip

Specifications
Attribute Value
PHY/Transceiver Interface MII/RMII/Turbo MII
Typical Data Rate 10 Mbps, 100 Mbps
Number of Ports 3
VLAN Support Yes
Fibre Support Yes
Power Supply Type Single
Typical Operating Supply Voltage 1.8 → 3.3 V
Mounting Type Surface Mount
Package Type QFN
Pin Count 88
Dimensions 12 x 12 x 1mm
Height 1mm
Length 12mm
Width 12mm
Minimum Operating Temperature 0 °C
Maximum Operating Temperature +70 °C
Temporarily out of stock - back order for despatch when stock is available
Price Each (In a Tray of 152)
SGD 17.013
(exc. GST)
SGD 18.204
(inc. GST)
units
Per unit
Per Tray*
152 +
SGD17.013
SGD2,585.976
*price indicative
Related Products
The KSZ8795 is a highly-integrated, Layer 2-managed, 5-port ...
Description:
The KSZ8795 is a highly-integrated, Layer 2-managed, 5-port switch with numerous features designed to reduce system cost. It is intended for cost-sensitive applications requiring four 10/100Mbps copper ports and one 10/100/1000Mbps Gigabit uplink port. Integrated 5-port 10/100 Layer-2 switch with ...
The KSZ8794CNX is a highly integrated, Layer 2 ...
Description:
The KSZ8794CNX is a highly integrated, Layer 2 managed, four-port switch with numerous features designed to reduce system cost. It is intended for cost-sensitive applications requiring three 10/100Mbps copper ports and one 10/100/1000Mbps Gigabit uplink port. The KSZ8794CNX incorporates a ...
The KSZ8863MLL/FLL/RLL are highly integrated 3-port switch ICs ...
Description:
The KSZ8863MLL/FLL/RLL are highly integrated 3-port switch ICs in a small footprint. They are designed to enable a new generation of low port count, cost-sensitive and power efficient 10/100Mbps switch systems. Low power consumption, advanced power management and sophisticated QoS ...
The KSZ8864RMN is a highly-integrated, Layer 2 managed ...
Description:
The KSZ8864RMN is a highly-integrated, Layer 2 managed 4-port switch with optimized design, plentiful features and smallest package size. It is designed for cost-sensitive 10/100Mbps 4-port switch systems with on-chip termination, lowest-power consumption, and small package to save system cost. ...