RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.
 
MPN

Hero Display Interface Kit Mitsubishi 8.4 XGA Display

This image is representative of the product range


Discontinued product
RS Stock No.:
727-1167
Mfr. Part No.:
Galaxy 4 Kit for 8.4 XGA
Manufacturer:
Hero

Dedicated Interface Kits for TFT Displays


This range of interface kits are designed for use with a specific Optrex, Mitsubish or NLT industrial display. Each display interface kit features an interface card that is pre-configured to work with a partner high brightness TFT panel (the displays for use with each kit are shown in the table).


Interfaces with TFT graphic displays
Analog RGB (VGA input), DVI and Audio supported
Multi-sync capability up to WSXGA resolution @ 75Hz compatible standard
DOS, VGA, SVGA, XGA, WXGA, UXGA and WUXGA VESA timing
Full control of all relevant display and interface parameters via OSD
Signal Power Level selection by Jumper Switch on the PCB: 3.3V, 5V, 12V
Compact Dimensions: 110 x 120 x 14mm
Operating temperature range: 0 to 50°C


Kit contents


Pre-configured Interface board
OSD control board
LED backlight driver board
Linking cables


Note

Requires: +12V / 3.5A DC Single Power, 42W AC/DC power adapter (not supplied).

Hero Display Interface Kits

AttributeValue
For Use WithOptrex or Mitsubishi 8.4 XGA TFT
Interface TypeDVI, LVDS, RGB
Kit ContentsLED Board, Linking Cable, OSD Control Board, Pre-Configured Interface Board
Kit NameDisplay Interface Kit Mitsubishi 8.4 XGA Display