Entrelec, Cover, CPV Series

  • RS Stock No. 413-2353
  • Mfr. Part No. 1SNA176791R2100
  • Manufacturer Entrelec
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Terminal Cover

Requires a separator end section every 40cm approx. and at DIN rail extremities. A 6mm dia. hole is required in the cover at each separator.

Transparent PVC protective cover, 1m length in 2 sizes
Snap-fits into place and secured with a plastic fastener
For both symmetric and asymmetric DIN rails

Specifications
Attribute Value
Accessory Type Cover
Series CPV
For Use With Terminal Block
101 In stock for delivery within 4 working days
Price Each
SGD 32.12
(exc. GST)
SGD 34.37
(inc. GST)
units
Per unit
1 +
SGD32.12
Related Products
For the termination of 3 wire sensors. Common ...
Description:
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...
For standard range of DIN rail terminals. Supplied ...
Description:
For standard range of DIN rail terminals. Supplied as cards of 100 and marked 1 to 100 or blank, in 5mm or 6mm pitch. 5mm markers are suitable for consecutively marking terminals of 5mm width. 6mm markers are for terminals ...
End capsGreyFor screw terminal blocksDisconnect type 6 mm ...
Description:
End capsGreyFor screw terminal blocksDisconnect type 6 mm pitch and function blocks 5 mm pitch.
Requires a separator end section every 40cm approx. ...
Description:
Requires a separator end section every 40cm approx. and at DIN rail extremities. A 6mm dia. hole is required in the cover at each separator. Transparent PVC protective cover, 1m length in 2 sizesSnap-fits into place and secured with a ...