SEGGER J-Link EDU

  • RS Stock No. 131-1323
  • Mfr. Part No. 8.08.90 J-Link EDU
  • Manufacturer SEGGER
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

J-Link EDU

J-Link EDU is a JTAG programming and debug probe supporting a large number of processor cores. Functionally identical to the J-Link BASE, but with limited support, it's aimed at the Education and Hobbyist market. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others.

Supported Processors

• ARM7/9/11, Cortex-A5/A7/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5
• Microchip PIC32
• Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N

Features

• Direct download into Flash memory of most microcontrollers supported
• Download speed up to 1MB/second
• Supports concurrent access to CPU by multiple applications
• GDB Server included: allows using J-Link remotely via TCP/IP
• Supports multiple target interfaces: JTAG, SWD
• Supports SWV/SWO (Serial Wire Viewer / Serial Wire Output)
• Wide target voltage range: +1.2V to +3.3V, +5V tolerant
• Supports JTAG chains with multiple devices
• Embedded Trace Buffer (ETB) support
• Various target adapters and optical isolation adapters available
• Powered via USB connector
• Support for adaptive clocking
• All JTAG signals can be monitored, target voltage can be measured
• Target power supply: 300mA with overload protection
• Target interface: JTAG 20-pin
• PC interface: USB 2.0
• Dimensions: 100 x 53 x 27mm
• Cross-platform support (runs on Windows, Linux, Mac OS X)
• Supported by all major IDEs
• Support via the SEGGER on-line forum: forum.segger.com

Target Adapters & Adapter Cables

131-1325 J-Link Target Power Supply Adapter • 131-1326 J-Link 10-pin Needle Adapter
131-1327 J-Link RX100/200/600 MCU Adapter
131-1328 J-Link 19-pin ARM Cortex-M MCU Adapter
131-1329 J-Link 9-pin ARM Cortex-M MCU Adapter
131-1330 J-Link 14-pin ARM 7/9/11 MCU Adapter
131-1331 J-Link Microchip PIC32 MCU Adapter

Link Isolator Boards

131-1335 J-Link ARM JTAG Isolator Board • 131-1336 J-Link ARM SWD Isolator Board
131-1337 J-Link USB Isolator Board

Note

J-Link EDU may only be used for non-commercial purposes.

Supplied with

USB cable, 20-pin ribbon cable

Specifications
Attribute Value
For Use With Flash microcontrollers
96 In stock for delivery within 3 working days
Price Each
SGD 101.33
(exc. GST)
SGD 108.42
(inc. GST)
units
Per unit
1 +
SGD101.33
Related Products
The Atmel ATWILC1000 is a link controller meant ...
Description:
The Atmel ATWILC1000 is a link controller meant for usage with third party TCP/IP stacks providing IEEE 802.11b/g/n WiFi support in a 2.4GHz band. The firmware of the ATWILC1000 is loaded from the host MCU. This provides an easy way ...
To help accelerate the development of your project, ...
Description:
To help accelerate the development of your project, this expansion board provides easy access the pins on your Pycom board. Together with the pinouts, there is a micro-USB connector for power and serial communications, a Lithium Polymer battery charger, reverse ...
This antenna kit is designed for use with:FiPy ...
Description:
This antenna kit is designed for use with:FiPy - 5 network IoT development board (RS 136-8855)LoPy - LoRa, WiFi, BLE development board (RS 125-9532)SiPy - SigFox, WiFi, BLE development board (RS 125-9533 and RS 125-9540).The kit includes:- RF Cable Assemblies ...
The JTAG-HS3 programming cable allows high-speed programming/debugging of ...
Description:
The JTAG-HS3 programming cable allows high-speed programming/debugging of Xilinx FPGA and SoC devices from a host PC. • Separate Vref drives JTAG signal voltages• Vref can be any voltage between +1.8V and +5V• USB 2.0 HS port drives JTAG bus ...