Chauvin Arnoux P01120663 Current Probe & Clamp

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Chauvin Arnoux MiniFLEX MA130 Series Compact Flexible Current Sensors

These compact, lightweight and ergonomic sensors of varying diameters are capable of clamping all types of conductors, whatever their number, dimensions or shape (bars, etc.). Due to their flexibility, they can be used in any location, however cramped. They are ideal for the requirements in both industry and the tertiary sector. Their quick and easy opening/closing system makes them simple to handle even when wearing safety gloves.

MiniFlex® MA130 sensors are equipped with an automatic standby function which can be deactivated at start-up for long-term measuring campaigns. They can now be powered in 2 ways: either by batteries or by an external power supply (standard μUSB socket). On the control unit, the 3 LEDs (green, yellow and red) indicate, the battery status, the status of the automatic standby function and any measurement capacity overshoots. The single phase versions offer 4 measurement calibres, while the 3 phase versions offer 3.

Comprising 3 flexible sensors which can be connected directly to any multimeter, wattmeter or logger. These flexible coils offer the following major advantages: • Current measurement even in places where access is difficult
• Large measurement range
• Bandwidth suitable for industrial frequencies and harmonic analysis
• No saturation effect, so no overheating
• Constant low phase shift appropriate for watt metric measurements

Features and Benefits

• Measuring Range: From 0.5 A to 3 kA • 3 measuring ranges
• Length of the measuring loop (enclosure diameter): 25 cm (Ø7 cm)
• Degree of protection loop/housing: IP67/IP54
• Output Signal: AC voltage
• 3 coaxial connection cables with 1 safety BNC connector each
• Power Supply: 2 batteries 1.5 V AA or external via μUSB Type B 5 V
• Battery Operating Time: 500 hours
• 600 V CAT IV

Supplied with

3 flexible current sensors, 2 x 1.5 V AA / LR6 alkaline batteries, 1 user manual in 5 languages, 1 safety datasheet, 1 verification certificate, 1 set of coloured rings for identifying/fool proofing the cables and 3 female BNC / 4 mm male plug adapters

Specifications
Attribute Value
Maximum Conductor Size 70mm
Safety Category CAT III 600 V, CAT IV 600 V
Safety Category Level CAT III, CAT IV
Model Number p MA130-250
Best Accuracy 1 %
Safety Category Voltage 600V
1 In stock for delivery within 5 working days
Price Each
Was SGD1,540.36
SGD 1,454.80
(exc. GST)
SGD 1,556.64
(inc. GST)
units
Per unit
1 +
SGD1,454.80
Related Products
Dual range a.c. current clamp nominal measuring ranges ...
Description:
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10kHz bandwidthErgonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cableMax. conductor size ...
The Fluke i30s AC/DC current clamp has a ...
Description:
The Fluke i30s AC/DC current clamp has a current range of 30A. It is a new age device used with oscilloscopes and DMMs for accurate, non-intrusive measurement and complex waveform currents. Inclusions:Alkaline PP3 battery, 4mm shrouded plug adaptor, and an ...
Suitable for use with oscilloscopes, recorders and data ...
Description:
Suitable for use with oscilloscopes, recorders and data loggers a.c. coupled output (no d.c. offset) Voltage output of 3V full scale for each range Fits around conductors up to 160mm diameter Extended battery life and external power supply input Meets ...
Various bandwidths: DC to 50 MHz, 100 kHzDC ...
Description:
Various bandwidths: DC to 50 MHz, 100 kHzDC and AC measurementsSuperior accuracy and high signal to-noise ratioLow circuit insertion lossBattery powered with BNC connector or oscilloscope powered AutoProbe interface.