Tektronix A622 Current Probe & Clamp

  • RS Stock No. 851-224
  • Mfr. Part No. A622
  • Manufacturer Tektronix
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

TekScope Accessories A621 & A622

Tektronix accessories include the industrial-style clamp-on current probes A621 ( 851-218 ) and A622 ( 851-224 ) which have mV outputs and enable current waveform measurements on all TekScopes.

Tektronix Current Probe & Clamp

The Tektronix ’long nose’ style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. Equipped with a BNC connector, it can be used with a shrouded banana plug adapter*1. It can also be used on digital multimeters, TekMeter, and scopes. This device can measure AC/DC currents from 50mA to 100A peak over a frequency range of DC to 100kHz. It provides 10mV or 100mV output for each Amp measured.

Features and Benefits

• For DMMs and oscilloscopes
• Safety category voltage is 600V

Applications

• Motor drives
• Inverters
• Power supplies
• Avionics

Certifications

• CAT III 600V
• CAT III

Specifications
Attribute Value
Current 100A
Probe Type AC/DC
Minimum Bandwidth 0Hz
Maximum Bandwidth 100kHz
Maximum Conductor Size 11.8mm
Safety Category CAT III 600 V
Safety Category Level CAT III
Model Number p A622
Safety Category Voltage 600V
Bandwidth DC → 100 kHz
3 In stock for delivery within 3 working days
Price Each
SGD 1,369.15
(exc. GST)
SGD 1,464.99
(inc. GST)
units
Per unit
1 +
SGD1,369.15
Related Products
Standard AC current pliers Inspired by the principle ...
Description:
Standard AC current pliers Inspired by the principle of the Rogowski coil.Can measure intensity up to 3000 A when used with oscilloscopes and recorders.Its flexible measurement head is light and can be easily and quickly installed into hard-to-reach places.Three ranges: ...
Dual range a.c. current clamp nominal measuring ranges ...
Description:
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10kHz bandwidthErgonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cableMax. conductor size ...
The i30 may be used in conjunction with ...
Description:
The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement. ...
Suitable for use with oscilloscopes, recorders and data ...
Description:
Suitable for use with oscilloscopes, recorders and data loggers a.c. coupled output (no d.c. offset) Voltage output of 3V full scale for each range Fits around conductors up to 160mm diameter Extended battery life and external power supply input Meets ...