Weidmuller, PZ 10 Plier Crimping Tool for Wire Ferrule

  • RS Stock No. 848-5620
  • Mfr. Part No. PZ 10 HEX
  • Manufacturer Weidmuller
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Weidmuller PZ 10 Bootlace Ferrule Hex Crimp Tool

PZ 10 hex radial crimping tool for crimping wire end ferrules with or without plastic collars with a wire size range of 0.14 to 10mm2. With such a wide wire range in one tool the need to change tools is eliminated along with associated crimping errors. This PZ 10 hex crimp hand tool produces hexagonal crimps with a small diameter rounded crimp form making it ideal for confined clamping spaces. Hexagonal wire end ferrules provide a more secure connection than other crimping forms for screw, spring or direct-plug in clamping systems. Two crimping surfaces are always positioned in parallel to one another providing enough space to create a stable connection including direct plug-in connections. This PZ 10 crimp tool features a ratchet system which keeps the tool closed until the crimp is complete ensuring a consistent crimping quality. A release option is also incorporated in case of incorrect operation. The handles have an ergonomic design and do not spring open after crimping making the PZ 10 hand crimp tool safe and comfortable to use.

Features and Benefits:
• Wide crimping range of 0.14 to 10mm2 eliminates the need to change tools
• Meets DIN and UL standards for large cross-sections measuring from 0.14 mm² to 10 mm².
• Round shaped crimp shape with small diameter ideal for limited clamping space
• Ratchet mechanism guarantees consistent crimp quality
• Release option in the event of incorrect operation
• Ergonomically designed handles

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies

What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?
• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.


Compliance with DIN 46228, 1 and 4

General Support Tooling

Attribute Value
Series PZ 10
Crimp Connector Type Wire Ferrule
Crimp Tool Type Plier
Overall Length 195 mm
11 In stock for delivery within 4 working days
Price Each
Was SGD517.24
SGD 493.49
(exc. GST)
SGD 528.03
(inc. GST)
Per unit
1 +
Related Products
Brought to you by RS Pro, a reliable ...
Brought to you by RS Pro, a reliable crimping tool with a non-ratchet, cam action for crimping the centre contact and rear ferrule of the ’N’ crimp plug. A quality crimping tool is a huge requirement to ensure a perfect ...
Ferrules available in the French colour code range ...
Ferrules available in the French colour code range in sizes 0·5 to 2·5mm².,Each pack of ferrules contain 10 strips of 50, which can be rapidly terminated with a special tool, with automatic feed action enables cables to be cut, stripped ...
The RS PRO Janus is an ergonomic crimping ...
The RS PRO Janus is an ergonomic crimping tool with self-adjusting dies for producing a trapezoid crimp profile on wire ferrules 0.14-10.0 mm²/AWG 26-8. This durable ratchet crimping tool allows cutting, stripping and crimping to be easily achieved with minimal ...
Introducing the RS PRO Crimp Tool for insulated ...
Introducing the RS PRO Crimp Tool for insulated terminals. This high-quality tool has been designed with precision crimping dies that enable accurate and easy connector crimping with minimal user effort. The DuoTech soft-grip handles have been ergonomically designed with the ...