RS PRO Ratchet Crimping Tool for BNC, TNC

  • RS Stock No. 683-1627
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): SE
Product Details

RS PRO Crimp Tool For BNC, TNC and N Type Coaxial Connectors

The RS PRO crimping tool is an “Original line” hand crimp tool for BNC, TNC and N coaxial cable connectors. Producing 5.41 mm, 6.48 mm, 1.69 mm/.213'',255", 0.067'' hexagon shaped crimps, with the minimum of effort, either right or left handed. Suitable for cable types RG108A/U, RG142B/U, RG210/U, RG223/U, RG302/U, RG58C/U, RG59B/U, RG62A/U, RG62B/U, RG71B/U

Features and Benefits:

• Non-slip main handle and low friction moving handle ensure a comfortable hand grip
• Provides two-hand grip in the final phase of crimping, increasing comfort and productivity
• Full cycle crimp mechanism to ensure consistent, reliable crimp
• Ratchet release mechanism to clear mis-crimps and obstructions
• Precision eccentric adjustment for consistent performance and ability to calibrate
• Each tool has a unique serial number for traceability
• Durable: life span exceeds 50000 cycles
• High strength, through hardened alloy Swedish steel construction

Typical Applications
Crimping tools can be used for a variety of applications:-
• Maintenance & repair
• Electrical Installations
• Cable assemblies

How to maintain the product?
• To maintain a good function and long life: Axles and other movable parts should be regularly lubricated
• Lubrication* is recommended at least every 10,000 cycles whenever tool is exposed to dirt or other contaminants
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly

*Use a light mineral-free oil

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Specifications
Attribute Value
Crimp Tool Type Ratchet
Crimp Connector Type BNC, TNC
Overall Length 198mm
58 In stock for delivery within 3 working days
Price Each
SGD 184.40
(exc. GST)
SGD 197.31
(inc. GST)
units
Per unit
1 +
SGD184.40
Related Products
C.K. Ratchet Crimping Pliers have been designed with ...
Description:
C.K. Ratchet Crimping Pliers have been designed with professionals in mind for the safe and secure crimping of BNC/TNC connectors to coaxial cable. Heavy-duty frame and jaws made from hardened, high-quality carbon steel, offer a long life and hassle-free operation. ...
The ratchet is pre-set to a specific force ...
Description:
The ratchet is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the dies are bottomed. The handles cannot be opened until a full crimping cycle is achieved therefore preventing partial ...
473-0648 A high quality low cost ratchet action ...
Description:
473-0648 A high quality low cost ratchet action crimp tool for terminating both 50Ω and 75Ω connector ranges such as BNC, TNC, UHF, mini UHF and SMA, groups A and C.,Not suitable for BNC connectors utilising cable groups H, J, ...
Bought to you under the trusted RS brand, ...
Description:
Bought to you under the trusted RS brand, this right-angled hand crimp tool for is designed for .250 'F' crimp type flag crimp terminals (see stock number 488-1336 typically) with a wire size range of 0.5 to 2.0mm2. The flag ...