RS PRO Plier Crimping Tool for Bootlace Ferrule

  • RS Stock No. 779-554
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

RS Hand Crimp Plier Tool for Bootlace Ferrules

RS hand crimp plier tool for crimping bootlace ferrules with a wire size range of 0.5 to 16mm2. The crimping indents of this bootlace ferrule hand crimp plier tool are clearly marked with the different wire size ranges.

Features and Benefits

• Supports a wire size of 0.5 to 16 mm²
• Suitable for crimping bootlace ferrules
• Ensures integrity the connector termination
• The indents are clearly marked with the different wire size ranges

Typical Applications

• Maintenance & repair
• Electrical Installations
• Computer Interfacing
• Cable assemblies

FAQ:
How easy are they to use?

They are very easy to use, choose the male or female pin for application, insert the wire into the pin then open the crimp tool, insert into the hole of the indent crimper and squeeze until the cycle finishes.

How do you maintain the product?

• Movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Specifications
Attribute Value
Crimp Tool Type Plier
Crimp Connector Type Bootlace Ferrule
6 Within 1 working day(s) when ordered before 3.30 pm.
35 Within 4 working day(s) (Global stock)
Price Each
SGD 59.56
(exc. GST)
SGD 63.73
(inc. GST)
units
Per unit
1 +
SGD59.56
Related Products
Brought to you by RS Pro, a reliable ...
Description:
Brought to you by RS Pro, a reliable crimping tool with a non-ratchet, cam action for crimping the centre contact and rear ferrule of the ’N’ crimp plug. A quality crimping tool is a huge requirement to ensure a perfect ...
RS PRO range of crimp tools for crimping ...
Description:
RS PRO range of crimp tools for crimping insulated connectors and non-insulated ferrules. These tools are compact and lightweight, with ergonomically shaped handles making them very comfortable to use. These crimp tools have a ratchet mechanism with emergency release ensuring ...
Introducing the RS PRO Crimp Tool for insulated ...
Description:
Introducing the RS PRO Crimp Tool for insulated terminals. This high-quality tool has been designed with precision crimping dies that enable accurate and easy connector crimping with minimal user effort. The DuoTech soft-grip handles have been ergonomically designed with the ...
The SCART plug assembly consists of 20 loose ...
Description:
The SCART plug assembly consists of 20 loose piece tin-plated crimp contacts which may be inserted into the contact housing and terminated using crimp tool RS stock no. 210-5012. The socket is designed for 90° PCB mounting and houses 21 ...