End Cap for use with 5SH5 5 MCB, 5ST3 7 MCB

  • RS Stock No. 521-5061
  • Mfr. Part No. 5ST3748
  • Manufacturer Siemens
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Series 5ST3 7 Bus-Bar System

With pin connections
Cut-to-length bar
For 1 or 3-phase line protective switches of the series 5SJ6 and 5SY
No additional connection terminal required for stranded connection up to 35mm²
Excellent accessibility for feeder cable
50→90A load at infeed single-sided/in-centre for 10mm²; 65→120A for 16mm²
Pin type connection
Material: Cu (10mm²); 16mm² fully insulated
Lug spacing: 18mm

Standards

DIN 57606, DIN 57659

Standards

DIN 57606, DIN 57659

Siemens Distribution Boards & Accessories

Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications.,Type C characteristic offers short circuit response of 5-10 x normal rated current, making it ideal for circuits with higher inrush currents such as motor control and fluorescent lighting installations in industrial buildings where nuisance tripping might occur if a faster type was used.

Specifications
Attribute Value
Accessory Type End Cap
Range Sentron
For Use With 5SH5 5 MCB, 5ST3 7 MCB
163 Within 4 working day(s) (Global stock)
823 Within 5 working day(s) (Global stock)
Price Each
SGD 1.16
(exc. GST)
SGD 1.24
(inc. GST)
units
Per unit
1 +
SGD1.16
Related Products
Heat-sealable end cap with thermoplastic internal adhesiveHigh mechanical ...
Description:
Heat-sealable end cap with thermoplastic internal adhesiveHigh mechanical protectionSuitable for outdoor use, particularly for routing cable through soil.
For applications where extra protection is requiredFront cover ...
Description:
For applications where extra protection is requiredFront cover polycarbonate, seating material chloroprene rubber.
The ABB 3 pole high terminal cover has ...
Description:
The ABB 3 pole high terminal cover has width of 105mm,height of 95mm and length of 150mm. It suitable for product class SACE Tmax XT. Standards IEC 60947-2Configuration type can be loose or configurable.
High quality, rugged industrial design in a range ...
Description:
High quality, rugged industrial design in a range of adjustable pressure settings100VA rated contacts, up to 42V max.Protection rating: IP65 with protective cap.