In Circuit Debugger/Programmer

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

The STMicroelectronics ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 range of microcontrollers.
The ST-LINK/V2 comes with a USB A to mini B cable which plugs directly into your PC and provides power to the module. This device communicates with the STM8 and STM32 MCUs via an application board. This is done via the SWIM (single wire interface module) and JTAG/SWD (serial wire debugging) interfaces.

• 5V power via USB
• DFU (Direct Firmware Update) feature
• LED indicator when connected to your PC
• Operating temperature: 0 to +50 °C

SWIM Features:
• 1.65 to 5.5 V
• SWIM low-speed and high-speed modes supported
• Programming speed: 9.7 Kbytes/s (low speed) and 12.8 Kbytes/s (high speed)
• SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
• SWIM cable for connection to the application via a pin header or a 2.54mm pitch connector

JTAG/SWD Features:
• 1.65 to 3.6 V
• 5 V tolerant inputs
• JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
• JTAG supported
• SWD and serial wire viewer (SWV) communication supported

Versions Available:
(880-1599) ST-LINK/V2-ISOL - with digital isolation
(714-1707) ST-LINK/V2

STM32 Software Development Tools and In-Circuit Debugger/Programmer

Specifications
Attribute Value
For Use With STM8 & STM32 MCUs
Interface USB
28 Within 1 working day(s)
146 Within 4 working day(s) (Global stock)
Price Each
SGD 34.17
(exc. GST)
SGD 36.56
(inc. GST)
units
Per unit
1 +
SGD34.17
Related Products
The SPC5-UDESTK is a USB/JTAG interface to enable ...
Description:
The SPC5-UDESTK is a USB/JTAG interface to enable the debugging and programming of the 32-bit SPC56 and SPC57 microcontrollers for automotive applications. It offers a collection of tools; including source file management, project building and a powerful HLL debugger. It ...
Microchip ATMEL-ICE is a development tool designed for ...
Description:
Microchip ATMEL-ICE is a development tool designed for debugging and programming microcontrollers (MCUs). It is used with SAM and AVR microcontrollers, with ARM Cortex-M core, which has on-chip debug capability. Atmel-ICE unit USB cable (1.8m, high-speed, Micro-B) DC flat cable ...
The PIC-01 allows you to program Microchip serial ...
Description:
The PIC-01 allows you to program Microchip serial PIC microcontrollers, (PIC12Cxxx, PIC12CExxx, PIC12Fxxx, PIC16Cxxx, PIC16CExxx, PIC16Fxxx, and PIC18Fxxxx families), as well as serial EEPROMs Series, (24Cxx family).Equipped with 5 tulip sockets, supports components in DIP packages of 8, 18, 28 ...
The Leaper-5E is a battery or mains powered ...
Description:
The Leaper-5E is a battery or mains powered USB Handy MCS-51 Writer. Supports a wide range of Devices like Atmel, Hyundai, Intel, Issi, Philips, SST, Temic and Winbond. High performance on programming Atmel AT89S52 only 4 seconds to erase, blank ...