Microchip MCP2551-I/P, CAN Transceiver 1Mbit/s 1-Channel ISO 11898, 8-Pin PDIP

  • RS Stock No. 876-7259
  • Mfr. Part No. MCP2551-I/P
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

MCP2551 CAN Transceivers

The Microchip MCP2551 is a high-speed CAN Transceiver that can operate at speeds of up to 1 Mbps. Serving as an interface between a CAN Controller and the physical bus, the MCP2551 provides differential transmit and receive capability and is fully compatible with ISO 11898. The MCP2551 is suitable for both 12 V and 24 V systems.

Features

Supports 1 Mbps operation
Slope control input
Implements ISO 11898 physical layer requirements
Suitable for 12 V and 24 V systems
Externally controlled slope for reduced RFI emissions
Permanent dominant detect
Low-current standby operation
High noise immunity due to differential bus implementation

CAN Bus Communication - Microchip

Specifications
Attribute Value
Maximum Data Rate 1Mbit/s
Number of Transceivers 1
Standard Supported ISO 11898
Power Down Mode Sleep, Standby
Maximum Supply Current 75 mA
Mounting Type Through Hole
Package Type PDIP
Pin Count 8
Dimensions 10.2 x 7.1 x 5mm
Length 10.2mm
Width 7.1mm
Height 5mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +85 °C
Minimum Operating Supply Voltage 4.5 V
Minimum Operating Temperature -40 °C
300 In stock for delivery within 4 working days
Price Each (In a Tube of 60)
SGD 1.37
(exc. GST)
SGD 1.47
(inc. GST)
units
Per unit
Per Tube*
60 - 60
SGD1.37
SGD82.20
120 +
SGD1.273
SGD76.38
*price indicative
Related Products
A charge pump IC converts voltages using switching ...
Description:
A charge pump IC converts voltages using switching voltage technology and capacitive-energy storage elements. Charge pumps offer high-efficiency and compact solutions for applications with low-output current requirements.
Linear Technology offer a range of Hot Swap ...
Description:
Linear Technology offer a range of Hot Swap controllers providing circuit protection by limiting inrush current as well as fault isolation. They allow electronic circuit boards and cards to be inserted into live system backplanes. Hot Swap controller will sense, ...
A high performance analogue switch that combines low ...
Description:
A high performance analogue switch that combines low power with high speed. With a wide dynamic range and low signal errors and distortion, this switch is ideal for a variety of applications, including precision test equipment, guidance and control systems ...
An FPGA is a semiconductor device consisting of ...
Description:
An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block ...