Microchip Technology MCP2562-H/MF, CAN Transceiver 1Mbit/s 1-Channel, 8-Pin DFN

  • RS Stock No. 177-1930
  • Mfr. Part No. MCP2562-H/MF
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CH
Product Details

The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device family members are: • MCP2561 with SPLIT pin • MCP2562 with VIO pin

Supports 1 Mb/s operation
Implements ISO-11898-5 standard physical layer requirements
Very low standby current (Typ: 5μA)
VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O
SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes
CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus
Detection of ground fault, Permanent dominant detection on TXD, Permanent dominant detection on bus
Power-on Reset and voltage brown-out protectionon VDD and VIO pin

Specifications
Attribute Value
Maximum Data Rate 1Mbit/s
Number of Transceivers 1
Power Down Mode Normal, Standby
Maximum Supply Current 70 mA
Mounting Type Surface Mount
Package Type DFN
Pin Count 8
Dimensions 3 x 3 x 0.95mm
Length 3mm
Width 3mm
Height 0.95mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +150 °C
Automotive Standard AEC-Q100
Minimum Operating Supply Voltage 4.5 V
Minimum Operating Temperature -40 °C
Temporarily out of stock - back order for despatch 13/01/2020, delivery within 3 working days from despatch date
Price Each (In a Pack of 10)
SGD 1.56
(exc. GST)
SGD 1.67
(inc. GST)
units
Per unit
Per Pack*
10 - 40
SGD1.56
SGD15.60
50 - 90
SGD1.379
SGD13.79
100 +
SGD1.20
SGD12.00
*price indicative
Packaging Options:
Related Products
The MCP2542FD CAN transceiver is designed for high-speed ...
Description:
The MCP2542FD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, ...
The Maxim family of dual RS232 line drivers ...
Description:
The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface. Maxim’s RS232 dual transmitter/receiver will allow applications such as interface translation, modem, laptop as well as RS232 battery-powered systems due ...
The Maxim family of dual RS232 line drivers ...
Description:
The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface. Maxim’s RS232 dual transmitter/receiver will allow applications such as interface translation, modem, laptop as well as RS232 battery-powered systems due ...
NXP range of Decoders, Multiplexers, Demultiplexers and Analogue ...
Description:
NXP range of Decoders, Multiplexers, Demultiplexers and Analogue Switches from the 74HC Family of CMOS Logic ICs. The 74HC Family use silicon gate CMOS technology to achieve operating speeds similar to the LSTTL family but with the low power consumption ...