Microchip Technology MCP2562FD-H/SN, CAN Transceiver 8Mbit/s 1-Channel, 8-Pin SOIC

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device family members are: • MCP2561 with SPLIT pin • MCP2562 with VIO pin

Supports 1 Mb/s operation
Implements ISO-11898-5 standard physical layer requirements
Very low standby current (Typ: 5μA)
VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O
SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes
CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus
Detection of ground fault, Permanent dominant detection on TXD, Permanent dominant detection on bus
Power-on Reset and voltage brown-out protectionon VDD and VIO pin

Specifications
Attribute Value
Maximum Data Rate 8Mbit/s
Number of Transceivers 1
Power Down Mode Normal, Standby
Maximum Supply Current 70 mA
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Dimensions 4.9 x 3.9 x 1.5mm
Length 4.9mm
Width 3.9mm
Height 1.5mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +150 °C
Automotive Standard AEC-Q100
Minimum Operating Supply Voltage 4.5 V
Minimum Operating Temperature -40 °C
230 In stock for delivery within 3 working days
Price Each (In a Pack of 10)
SGD 1.60
(exc. GST)
SGD 1.71
(inc. GST)
units
Per unit
Per Pack*
10 - 40
SGD1.60
SGD16.00
50 +
SGD1.422
SGD14.22
*price indicative
Packaging Options:
Related Products
The MCP2542FD CAN transceiver is designed for high-speed ...
Description:
The MCP2542FD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, ...
The MCP2561/2FD is a Microchip Technology Inc. second ...
Description:
The MCP2561/2FD is a Microchip Technology Inc. second generation high-speed CAN transceiver. It offers the same features as the MCP2561/2. Additionally, it guarantees Loop Delay Symmetry in order to support the higher data rates required for CAN FD. The maximum ...
The KSZ8864RMN is a highly-integrated, Layer 2 managed ...
Description:
The KSZ8864RMN is a highly-integrated, Layer 2 managed 4-port switch with optimized design, plentiful features and smallest package size. It is designed for cost-sensitive 10/100Mbps 4-port switch systems with on-chip termination, lowest-power consumption, and small package to save system cost. ...
The Microchip Technology MCP23X17 family is a 28-pin, ...
Description:
The Microchip Technology MCP23X17 family is a 28-pin, 16-channel, surface mount SOIC package general purpose parallel I/O expander. It has an electric rating ranging between 1.8V and 5.5V. It consists of multiple 8-bit configuration registers for input, output and polarity ...